Secret
Members-
Posts
29 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Secret
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Bolt works great, only issue is nozzle has been deformed (see photos). This occurred due to magazines not being seated properly in the magwell. Approx 5000 rounds with it so far. Needs a replacement nozzle (can be AG nozzle like the one in there now or other mws nozzle such as the standard TM nozzle). Amazing rate of fire with this bolt. Message for any details, postage is an extra £5 or collection from Southampton.£70
Southampton - GB
-
-
This advert is COMPLETED!
- For sale
- Used
Can't get the photos up the right way for some reason!!! Gun shoots great- selling as I want a glock with trades. There are a few scratches on the gun which can be seen in photos due to holstering in another holster (previous owner). Includes 1 Novritsch green gas mag and 2 Tokyo Marui mags- all hold gas. The holster is a Nuprol glock holster which the SSP18 fits in. Comes with the paddles to attach to a belt/trousers. Includes the case. Postage is another £10 or collection is available from Coventry.£140
Coventry
-
-
This advert is COMPLETED!
- For sale
- Used
Only used in a handful of skirmishes and is in great condition with 5 mags. One of the mags developed the classic MP7 leak at the base plate but I purchased 5 size up o-rings from Eagle6 which prevent this and have installed 1 of these into the mag that was leaking and it holds gas perfectly now (these will be included and can be installed into the other 4 mags for an additional £10). Comes with an LPE tracer adapter and rear sling mount (the sling loop fell off in its first skirmished so instead I have looped some paracord through which works perfectly. Internally the MP7 is upgraded with: ML 50 (or 60- I can't remember now but I always use one of these) bucking Eagle6 nub (https://eagle6.co.uk/product/eaglesix-3dp-flat-hop-nub-3mm-5mm-for-tm-mp7-gbbr - installed is the 3mm which hops between 0.2 and 0.4 for me but the 5mm is included in case you need more) Laylax 6.00mm barrel Guarder Enhanced Nozzle (to prevent the classic MP7 broken nozzle) Creation 150% enhanced recoil spring (installed on the original spring guide but the Creation one is also included) The original barrel and nub are also included, along with a madbull red bucking. The gun shoots like a laser and can easily shoot 70m with a 0.36g. FPS is right around 340 but I once had to swap back to the original barrel in the middle of the summer (it was about 28 degrees that day iirc). Would be willing to trade for a few MWS mags plus cash my way but that's it. Willing to sell mags separately. Collection available in Coventry. Postage will be another £10 and fees are included in the price.£470
Coventry
-
-
-
This advert is COMPLETED!
- For sale
- Used
Needs new insert as it has been cut for an m4 and mp7. Originally from Patrol Base, not sure of the brand but it works fine. As you can see from images there’s a small amount of damage to one corner. Collection preferred but can post for an additional £10.£20
Coventry
-
-
This advert is COMPLETED!
- For sale
- Used
I absolutely love this gun, only selling as I need to downsize the collection. Upgraded with a 60 degree Maple Leaf Macaron bucking and nub. The original bucking is not included but a regular AEG nub is. Only used for about 5 games, so all is in excellent condition. There is 1 screw missing on one of the side rails, this is perfectly fine if you aren't attaching anything to it, but if you want to, I'd recommend buying another screw (about £7 iirc). The nozzle currently installed is the 1J nozzle which brings it to around 330fps, but I will include original too. An odin speedloader adapter for the mags will be included. This can be used with a regular speedloader if you don't have an odin to make loading easier and to help protect the feed lips. Comes with 5 mags all leak free- 4 black and 1 tan. Willing to trade (and maybe some cash) for another GBBR (must be m4 based such as GHK M4, MWS, VFC HK416A5 etc) Based in Coventry for collection, willing to travel for a trade and shipping can be arranged for £10. Willing to split and sell just mags.£350
Coventry
-
-
This advert is COMPLETED!
- For sale
- Used
Motor hasn’t seen much action as after getting the gun I fairly quickly started upgrading it. Probably seen around 5-6 gamedays, basically all on semi. Motor works flawlessly, only selling to free up some money for other projects and clear out my spares box! Message me for any info, price includes PP fees, postage is at cost- probably about £3.50 depending on the service you want. Collection is possible from Coventry if you're nearby.£10
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Looking to buy a VFC HK416A5 or HK416D. Gen 2 or 3, I don't mind, just needs to have the npas. Preferably with a few mags. Black or tan are fine. Also looking for any other GBB M4 from companies such as TM, VFC, GHK, Double Eagle etc£450
coventry - GB
-
-
This advert is COMPLETED!
- Wanted
- Used
I want to buy any of the 3 listed above (or similar gbbr) with 5 mags if they hold 30-35 or 4 mags if they hold more. I don't mind about upgrades, internal or external, however I currently have quite a strict budget hence a lot of the stuff on the market is too much due to their upgrades. Please message me whatever you have and I'l consider it! I'm from Southampton area so can collect if an hour or so away.£500
-
This advert is COMPLETED!
- For sale
- Used
2 mags on the right are nuprol hex mags, work flawlessly, never jam and hold around 110 rounds last time I counted. Not sure what brand the other 4 are, they’ve been sat in a box for a while now. The one labeled F jams up sometimes and doesn’t hold many bbs, never taken it apart so likely just dirty. The other 3 worked fine last I tested them but it’s been a long time so it isn’t a guarantee. Message me for any info, price includes PP fees, postage is at cost- probably about £3.50 depending on the service you want. Collection is possible from Southampton if your nearby.£20
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Chest rig has only been used a few times and sat in the cupboard for a few years- forgetting I have it, hence it’s in very good condition. Only thing is I have cut the elastic bits that go over the mags so I can easily get (AK) mags in and out. Will still hold m4 and AK mags without them falling straight out. Lots of pouches and lightweight, ideal for a beginner! Message me for any info, price includes PP fees, postage is at cost- probably about £3.50 depending on the service you want. Collection is possible from Southampton if your nearby.£15
-
This advert is COMPLETED!
- For sale
- Used
Includes: - Cyma CM045C wired to deans with maple leaf bucking and flat nub, with an m95 spring to make sure it is field legal. - 3 mid caps (3 mags on the left) - 3 high caps - 2 7.4V 1300Mah Lipos wired to deans - Railed dust cover Grip not included This gun was bought used with very little wear when purchased and has seen a couple years of on and off use. Whilst in use the gun was well maintained, being cleaned regularly. The gun hasn't been used in about a year but has been test fired and it still fires very well. This is a great gun with very impressive range for such a small gun. It can easily hop 0.32g bbs, and will hop more- just not tested for this. The gun shoots within all UK field limits, however I'm not 100% sure what it last chronoed at. The inner barrel and hop assembly is likely due a clean which I can do for you before I ship it if you aren't so tech savvy. The included railed dust cover can also be fitted for you before shipping if you would prefer. Can arrange collection in Southampton area, or postage for roughly £15 more, however I don't know exactly how much it would cost to send and I will only charge you the cost of the shipping. Please DM me for any further questions!£230
-
This advert is COMPLETED!
- For sale
- Used
For sale is my TM G18c, which suffered the classic TM slide crack due to green gas usage last game I ran it. I've decided to get a new pistol over fixing it as I want to change things up. I've owned this pistol for just over 2 years, however, it's probably only seen about 10 gamedays as a sidearm. The only thing I've done to the gun is replace the original bucking with a purple nineball bucking that I had lying around. Everything works perfectly in the gun (other than the slide!) and it has been well maintained for all its life. No mag included Original box included Price includes postage and Paypal fees. Can arrange collection in Southampton area. Please DM me for any further questions!£45
Southampton - GB
-
Hi all, I just got a TM MP7 which shoots beautifully but I want to run heavier bb's- 0.3g and the stock bucking can't do it. I had a spare ML 60 degree bucking, I can't remember what one exactly, I think the autobot, which I tried putting in, but can't seem to hop the 0.3s. I'm using the standard barrel and nub so I'm not sure if this is where I'm going wrong (maybe window on barrel is too short) or if I must have installed it incorrectly. Any help with anyone else's experience with this would be greatly appreciated!! I'm using green gas, not sure of the fps as I don't have a chrono Thanks
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
- Preferably with some mags and all parts that came with box - If you have some attachments I might be interested too - Based around coventry but I am willing to pay postage£300
-
This advert is COMPLETED!
- For sale
- Used
Willing to split. Gun comes installed with downgrade fps nozzle but will include original. Also includes original magazine and an hpa adapter for it. The gun needs a new piece in the hop up unit- costs about £10 if i remember correctly but its been a while. Other than that, all work perfectly. Due to the broken bit in hop up, the top piece of the gun must be removed to adjust the hop but still shoots good. The HPA is great fun, only selling as I’m not playing as much airsoft right now and have a couple other guns anyway. Please message for any questions and prices for individual items.£300
Southampton
-
FULLY Upgraded SNIPER VSR-10 with SCOPE, SUPRESSOR, SPARES, and BBS
Secret posted an advert in Spring Rifles
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
This gun was originally a Classic Army VSR-10 clone with a slightly different lower receiver. However, all internals are now upgraded. I have owned this gun for around 4 years now but most parts in the gun are less than 2 years old (I have taken quite a few breaks in playing airsoft so the parts in the gun have probably only shot around 15,000 shots, with the bucking much less). The gun is in good condition without much ware. The scope included is a 3-9x40 illuminating scope from amazon (cost around £60) and holds zero perfectly. The suppressor really helps keep the gun quiet and is in good condition. Includes 4 MAGS, 3 tokyo marui vsr mags and 1 classic army vsr mag. Comes with roughly 2000 0.48g bbs, 1000 geoffs and 1000 longbow. The main screws in the body are stripped, hence the tape, which works great. I don't have a chrono however last chronoed in at 480fps on a 0.2g and didn't joule creep much, meaning chronoed on 0.48g it is perfectly site legal in the UK. The gun shoots great, consistently hitting targets at around 80m. The spare parts included are: action army vsr10 hop chamber, action army 45 degree piston, airsoft pro 90 degree piston, and 3 various vsr springs. In the gun is: Airsoft Pro 90 degree trigger Action army (i think, not certain) teflon cylinder and cylinder head Springer custom works piston Airsoft pro spring guide Action army M150 spring Maple leaf hop chamber (only swapped out from AA unit as I need the nub from the AA chamber for another gun, would recommend buying a new nub and using AA chamber) Maple leaf autobot bucking (60 degree) Maple leaf crazy jet barrel (430mm) Sound dampening in stock (foam and old t shirts) The gun will be fully serviced before shipping and tested to ensure it is shooting perfectly (I have a range for 80m) Shipping will be an extra £10, more than willing to arrange collection and testing the gun. Please send any question you have my way. Only selling as I'm moving towards a more aggressive AEG role.£240
Southampton - GB