TommyPee

A few years ago i bought this JG Mac 10 in bits and built it back out using a new gearbox and motor wired to the trigger unit with a mini tamiya connector bypassing the original aep battery parts. It could do with a fuse to help clip everything into place inside and secure the wires more better. So this is ready for a 7.4 lipo and there’s an alright amount of space in there. Was it worth the hassle? Probably not hah! But I wanna pass it on to someone who might have a better use for it. Seems to feed alright, but not perfectly. I’m sure someone out there could sooop it up nice n proper. It comes with one hi cap mag, NO SUPPRESSOR, and a spare hop unit. Price plus £5 postage

Cool bit of kit to turn your gbbr into a compact little PDW. Bought and installed on a project I never got finished so used but never actually used at all. fits WE obviously for sure, goes onto a VFC receiver fine but you meet to make sure it just about over laps ther buffer retaining pin. Assuming GHK will be the same. I won’t refund if it doesn’t fit your rifle price plus £5 postage.

Righty, reluctant to sell, but would make moving house a little easier. Cheaper than others sold here, and way cheaper than new in the UK to reflect a couple issues. Works well despite these issues. It has fitted an upgraded CNC JWI hop chamber, Maple Leaf Crazy Jet inner barrel. Real Magpul K2 pistol grip (will include the stubby rattler grip too). Magwell adapted to take the VFC v2 and v3 VMags. Comes with the Artisan Rattler SD suppressor and rail kit. It also has nice Sig Markings from FCW. Ordered last October from Octagon airsoft. These things are super cool but have a few known problems. I’ve addressed them and it works great, but I’ve not actually skirmished it. Issues and solutions: - Finish kinda sucks and despite not being skirmished, has marked up quite easy. Purely cosmetic - Tolerances are too tight brand new and so I’ve had to cycle it a lot and rack it a lot to break in the internals. The stock recoil springs come very stiff and the finish is very sandy and rough and needed to be worn down through the internals moving how they need to to get it smooth. It’s nice and smooth now, but again, the finish has worn off parts of the bolt carrier and inside the receiver. - there’s a screw missing from inside the upper receiver (pictured) so far doesn’t seem to affect anything. - Original QD suppressor is stuck to the muzzle device. I don’t know how. I don’t want to ruin the finish on the suppressor with tools to remove it. - inner barrel extension removed from the stock suppressor because it’s not compatible with the maple leaf. - Stock Hop rubber over hops 25s or lower so could do with a change if light bbs are your thing. But 32s are perfect. Maybe not so good for CQB tho, which is the point of this gun. - Airsoft Artisan SD suppressor is scratched from some mlok grip screws foolishly. - Full auto fps and spread can be inconsistent. Would benefit from the hop upgrade. But semi auto is like a laser and snappy as hell. This thing is very nearly awesome. But could use a little tinkering still to really get it perfect. Full auto rate of fire will make you cry with excitement. On semi it’s snappy and crisp and accurate. It absolutely pings. The trigger is great and resets nice, clear and kinetically almost as clear as the break. It’s a very fun shooter. However, compared to other GBBRs it requires more regular cleaning of the internals because of the bad finish mixing with the lubricant in the gas and clogging up the very strong recoil springs. This is not as much an issue since I’ve been breaking it in. And has become lesser. Just expect to need to do more than the usual maintenance. Gas efficiency wise, when kept clean it’s up there with the rest of VFC V3 gas ARs, 3-5 mags worth of bbs on one gas fill. I have a series of very honest videos up on YouTube to take into consideration. I will not be selling it with a magazine. I’m afraid I need them all for my other VFCs they are quite available though on high pressure airsoft and other retailers. https://www.highpressureairsoft.co.uk/gas-magazines/vfc-m4-green-gas-magazine-30rds---grey To do this yourself: Gun on Defcon airsoft - £640 Upgraded JWI hop chamber - £52 plus shipping Maple Leaf Crazy Jet - £25 Airsoft Artisan SD kit and Rail - £160 shipped Plus Markings cost So really £420 despite no mag isn’t too much I don’t think. Or spend 3 times as much for a Toxicant MWS 🤷🏻‍♂️ Plus £10 P&P More pictures and videos available on request. Will only trade for an MWS CQBR or a GBBR G36 plus cash my way.

Selling cheap because despite it performing as it did new, it’s not brilliant and there’s some cosmetic wear. Will add more detailed pictures. mag release on one side snapped, doesn’t affect its operation tho, it does work fine just on the one side stock butt pad broke as was just cheap plastic. However can be replaced with the nicer wii tech one for the Maruis. Or a laylax piccatinny back plate and folding stock. would be nice as just a part of someone’s collection, as a nice mp7 to look at. The metal construction is actually quite nice, feels solid. I’ve found If you have a lipo set up on it, it’s perfectly adequate for indoor CQB in small rooms like an abandoned office building but any further out than 10m and you may as well throw the bbs. would be an excellent host for a HPA engine, cheap exterior for you to gut and build out how you like. Or alternatively if you wanted to keep it AEP… a heavier spring and Marui gears/gearbox and hop chamber and barrel would level it up to have more broader usability. I recommend getting an AEP lipo battery for a usable trigger response. PEQ AND OPTIC NOT INCLUDED. comes with one high cap, iron sights, original battery and charger £5 p&p

Before I buy one new I wanted to put a feeler out. TM only, I already have the WELL clone and it sucks, but I have mags for it already so I wanna stick with this and not the VFC or any GBB. with or without mags and battery mods, I don’t mind, just wanna see what’s out there cheers.

KWC DE50. Semi auto not full auto version. Plastic grip/lower frame cuts a bit of weight which is actually more practical when on your leg. Metal top section barrel and slide. Chonky and tough. This pistol is a beast. In perfect working order. Gave the metal parts a bit of “weathering” as the original finish looked a bit toy like for my liking. Taken it to a skirmish once but it just pretty much lived in the holster. Holster not included. Comes with both mags leak free. I find lubing the seals and leaving co2 bulbs in has kept them going a long time. 320-350 ish fps depending on temperature. Kicks like an absolute beast. plus £10 p&p

Pretty reluctant sale so not in a rush. Only selling it to buy a TM Chrome Desert Eagle. KWC DE50. Semi auto not full auto version. Plastic grip/lower frame cuts a bit of weight which is actually more practical when on your leg. Metal top section barrel and slide. In perfect working order. Gave the metal parts a bit of “weathering” as the original finish looked a bit toy like for my liking. Taken it to a skirmish once but it just pretty much lived in the holster. Comes with both mags leak free. I find lubing the seals and leaving co2 bulbs in has kept them going a long time. 320-350 ish fps depending on temperature. Kicks like an absolute beast. I will trade only for a chrome Marui Desert Eagle. The price includes postage an PP fees

Want to buy!! Prefer maruzen, will settle for well.

Want to buy!!

Pretty reluctant sale so not in a rush. Only selling it to buy a TM Chrome Desert Eagle. KWC old version. Semi auto not full auto version. Plastic grip/lower frame cuts a bit of weight which is actually more practical when on your leg. Metal top section barrel and slide. perfect working order. Gave the metal parts a bit of “weathering” as the original finish looked a bit toy like for my liking. both mags leak free. I find lubing the seals and leaving co2 bulbs in has kept them going a long time. Had it about 10 years. Bought a second one to replace a couple bits with over the years but kept this ones shell as it’s the older licensed version with all the trademarks. So I also have a bunch of bits for it as well. 350 ish fps depending on temperature. Kicks like an absolute beast. will trade only for a chrome Marui Desert Eagle.

Crisp, Light, Snappy, hard kickin, far throwing Tokyo Marui. All boxed and unskirmished. Just fired in the garden and kept on display in my collection in the box. Deserves more use for sure. the only change I’ve made is swapping the outer barrel for a chrome threaded one. Comes with the original mag and an extra one. Both leak free. No longer have the original plastic outer barrel. £120 posted Retailers are doing these £140 plus postage box new at the moment.

I’ve toyed with the idea of fixing or selling this several times and been torn. Priced as a Project for less than the cost of the included 6 mags. Can’t afford to put any more money into making this work at the moment. Has feeding issues caused by gas flow not putting enough energy into cycling the bolt far enough back for the nozzle to pick up a new bb. This was all put together from bits acquired over the years. I wanted to build a colt smg style gun with an A1 carry handle on a pcc lower. Tolerance issues meant that to have the upper and lower sit right for the bolt to cycle, you have to use an AEG front receiver pin. Not gunna lie, the lower has taken a beating trying to get stuck pins in and out of various places. The latest damage was the trigger guard pieces breaking off when changing the trigger guard. So a Daniel Defence trigger guard/pistol grip combo could be a good shout. Or a whole new lower, ir re attaching the broken bits. It could do with a new set of pins and retainer springs and the cross pin for the trigger box no longer fits, is too loose so I used a screw to hold it in place.. caveman I know. So there’s the A1 carry handle upper with a G&P short RIS II style rail, 10 inch barrel covered up with a custom suppressor that attaches to the threads and sleeves the barrel. Also has a real colt smg dust cover and deflector from Brownells This includes 6 gas tight mags. This is for anyone who has a WE PCC gun already and fancies a couple different upper receiver group options, and spare trigger parts all for the price of 6 unskirmished mags. Or for anyone with a bit of time and money to invest in what could be a pretty cool unique gun. I think with a new nozzle/bolt carrier, a new lower and a new set of pins and bits, it would be great. When it does fire it does it great. I put a WE bolt on from a new gun and it fired wonderfully. Just a shame I’ve got to move it on. Rather put the money into my other platforms. I will include every bit for it I have, down to nozzle parts, the broken trigger guard parts and anything else I can find. Price is for everything. It’s cheaper than buying just the mags anyway. Incl postage.