Sy87

Are these npas drop in fit or does it require sanding?

That is quite consistent shots 👍. With the nozzle full open it shoots 400 with 0.3s ? What fps do you usually set it to?

Thank you for the answer. I am thinking of getting the 4.5 as well. I am wondering If i need to threadlock the screw once the adjustment is set correctly?

Thanks for the feedback:) My trigger discipline needs work for sure lol. I was testing 0.36 today and the consistency was very good (able to hit a head sized object quite frequently at 145 feet). I might end up using 0.36 but it cost much more lol.... Good thing its not a spray and pray AEG. As for winding down the power, I am thinking of getting a NPAS. I am just wondering if you have any experience with the G&P npas nozzles as it has so many model variances. I am thinking of getting the 4.5 or 5.0 model as it is speced for 280-370mm and 370 and up barrels.

Was curving right and sometimes left. I did feel a breeze during shooting. Vertical deviation seems not too bad. I have my hop set as flat of a trajectory as I can , so bb doesn’t rise at the end of flight path. I am also wondering how I can with my guns insane joule creep. The field I play at allows 420fps /1.7 joules with 0.2bb , but they also chrono your fun with the bb weight that you will be playing with. My gun shoots 422 with 0.2bb but 370 with 0.32... , so I tried 0.36g and it shoots 358. 😫

I am wondering how accurate you guys can shoot at around 62 meter / 200 feet on a man sized target? I tested out my mws yesterday with 0.32 g bb shooting 370 fps, I was able to hit a trash can 6 times out of 10. The missed shots curved at the end of the flight path. I am not sure if it’s because of cross wind or inconsistency in my hop up / bb chambering by the bolt.

My field limit is 420 fps with 0.2 at 1.7 joules. My gun currently is shooting way too hot at 460 fps . Which g&p naps would be better? I saw that the 4.5 and 5.0 version is for inner barrel 280-370mm and 370 plus.

I am wondering what hop up set up you went with along with your maple leaf mr hop? I tried using it on my mws and found it inconsistent laterally. The trajectory seems nice when it’s flying straight.

Speaking of bolt carriers. What bolt do you guys recommend? I currently have a UAC aluminum bolt. Unfortunately, the bolt catch notch is not reinforced, I am worried it will eventually wear down and break.

Just installed the Laylax hop up chamber along with modify bucking. I am running into this weird issue where, the first bb that is chambered from a newly loaded mag always over hops to the sky, but all the following shots are straight and consistent. I am wondering if anyone else ran into this issue?

Hi guys, I am wondering if anyone has tried out the maple leaf max range hop up bucking yet? It seems to be quite good for vsr 10s.

Hi guys, I am running into an issue where after prolonged use of my mws, I noticed that the nozzle head is slowly scrapping bits of the hop up rubber off at the runners ‘s entrance inner layer. I am using the tan modify bucking and I am wondering if anyone ran into the same issue as me?

Aww sucks to hear about the adaptors. I used this adaptor in the past and it works but now it doesn’t, guess I have to use green gas only for this gun lol... kinda expensive compared to propane 😭

Hi guys, I am running into an issue where my mws mags aren’t charging properly with propane bottles using Airsoft innovation adaptor. Basically, the flow of gas stops quite quickly and the magazine can not fire many rounds. Yet, the same mag can be filled with my green gas bottle no problem. Gas flow is constant, and with a full charge I can shoot about 3 and half mag. I am wondering if anyone else ran into this issue?

I tried my best to align it this time and checked the arm for freedom of movement as I tightened the nut. Seems to be free to move right now, fingers crossed it won’t tighten again once many rounds are fired through it

Hi guys, I am wondering if anyone has run into issues where after tightening the barrel nut, the hop arm arm doesn’t move as freely. I am running into this issue where after dialing hop up all the way down, there is still hop shown in the barrel. Only if I press down on the hop with a barrel rod, does it reset. If anyone has this issue , how were they resolved? i am currently using a centurion arms mlok rail with a pts barrel spacer. Thank you kindly

What buckings do you guys use mostly? I currently have the modify tan bucking with a H nub. I am wondering if firefly bucking is any good, it is quite expensive.

I My mws stock was shooting around 360, after Prometheus barrel and modify bucking, bolt nozzle assembly upgrade, I am shooting around 440-450 on propane? Ya it’s expensive I got mine for 185 usd. I was disappointed when it didn’t work out of the box. But now that I got it working, I have gotten the trigger pull to a point where there is no slack. The wall is right at the beginning. Hope it last though ...

Ya I agree , it’s too much tinkering. I wish it was less adjustability and more reliability. I am wondering if the recoil messed up the setting for you? I ended up blue thread locking the bottom screw, will have to see how long that last me . On a side note, I ended up replacing my trigger sear spring with a weaker one lol... I found a spare disconnector spring on my tm glock, and used that instead. It seems to make the trigger sear not clamp as hard on the hammer as the original spring but still enough to stop hammer from resetting during bolt cycle.

I actually got it to work today. Basically, I loosened the hammer tension screw as well as set the trigger travel adjustment screw to neutral. I applied decent amount of Teflon grease on the hammer hook and the trigger sear and just played with the trigger sear adjustment screw until the trigger sear just lightly engages with the hammer. At this point previously the trigger would get caught and won’t reset, unless I push the trigger bar forward. But with the Teflon grease applied, the friction was gone and the trigger will reset even after hammer is recocked. I also lengthened and increased the spring tension on the sear in back that catches the hammer. It seems that the stronger spring allows the sear to catch the hammer faster. IMG_6655.MOV

Hi guys, I am new to this forum. I have a question regarding g & g adjustable trigger box. I recently purchased the trigger box but ran into issues. No matter what I do, I run into sticky trigger problem. After firing, and the bolt cycles, my trigger won’t reset properly. It seems when I release the trigger after firing, the adjustable trigger sear is still caught on the hammer. I have to manually push my trigger bar forward to disengage it, and I can squeeze the trigger again. I am wondering if anyone else ran into this problem and was able to solve it? Thank you