alxndrhll

Have a  Ferro Concepts FCPCv5 in Multicam up for grabs, in great condition. Without doubt my favourite plate carrier of all the ones I’ve tried, but I tend to run chest rigs so it’s wasted on me.
Included as follows:
 
Ferro Concepts FCPCv5 Base - Multicam - Size M Ferro Concepts 3" Assault Cummerbund – Multicam Ferro Concepts 3AC Cobra Buckle Kit – Coyote Ferro Concepts FCPC Aluminum Tri Glide Ferro Concepts Adapt KTAR Front Flap – Multicam Ferro Concepts Adapt Padded Strap Socks – Multicam Ferro Concepts Adapt Drag Handle – Multicam AXL Advanced Admin Zipper for Ferro FCPC V5 – Multicam PTS Foam SAPI plates - Medium  
Looking for £640 including postage and PayPal
Cheers,
Alex

Hi folks,
 
As the title suggests, have a Marui MP5 SD6 up for grabs. Has been upgraded by Eagle6, details of which can be found below. Test video fo which can be found here.
 
Internals:
EagleSix M100 Main Spring (281 FPS on a 0.28g BB)
EagleSix 1x PowerSpacers
TM Samarium Cobalt Motor
Prometheus Hard Gear Set 18:1
Prometheus 6mm Bearings
Firefly Hop Rubber For AEP
Prometheus Flat Hop Nub
 
Accessories
7x Tokyo Marui 72rnd Midcaps (Meaning 8 in total)
2x VapexTech 7.4v 1300mah LiPo batteries
Stock parts which have been upgraded
Genuine Vortex Crossfire Red Dot
Repro Scalarworks Mount
Repro Midwest Extended Top Mount (I believe this is CYMA)
Genuine Arisaka Defense Offset Scout Light Mount
Repro SureFure Scout Light
 
Happy to discuss different packages of what's detailed above but not looking to split anything (so please do not message me about splitting mags, I will just ignore them) until the replica itself has sold.
 
Price for everything detailed above is £1100 including PayPal and postage.
Price for just the replica and top rail with 1 mag and nothing else is £700 including PayPal and postage.
Truthfully I'd rather deliver in person, you collect or meet half way given the value.
 
Cheers,
Alex

Hi folks,
 
Surplus to requirement so putting it up for grabs. Lovely replica, zero wobble and shoots lovely on a 0.32.
 
Internals
• Gate Titan
• Full Alpha Wired
• ASG CNC 22000 22tpa motor
• SHS 13:1 gear’s
• Lonex Helical Bevel Gear
• Prometheus Steel Cylinder
• Lonex Ultimate v3 Cylinder Head
• ICS POM Piston
• EPES aluminium dual ‘O’ ring nozzle
• Lonex anti reversal latch
• Combat union CNC hop chamber
• PDI 6.04mm Barrel with R-hop
• Six G machine fitted bushings
• Travel adjustable trigger.
 
Externals
• Genuine Zenitco B30U Lower
• Midwest Industries railed gas tube
• Zenit PT-3 Stock
• Magpul PTS stippled pistol grip
• Cyma tactical selector
• LCT 4 piece booster
• LCT Extended Charging Handle
• Low Optic mount
 
Accessories
• 4x NPO genuine plum midcaps (absolute hens teeth, perfect in the magwell with zero wobble)
• 2x 2000mah 7.4v Vapex airsoft batteries
 
The old side rail for the optics has been removed from the left hand side of the replica along with the front stock latch, so the left hand side of the receiver is entirely slick.
 
Note the photo showing the replica with accessories is just a demonstration of how I had it set up.
 
Looking for £550 including PayPal fees and postage (via Parcelforce 48).
 
Cheers,
Alex

Hi folks,

New and never used, absolutely mint condition.
 
Looking for £140 including PayPal and postage.
 
Cheers,
Alex

Hi folks,
 
Have 6 of these available, initially all black (#01 is painted green and black). All in great condition and feed flawlessly. Have original packaging for all 6, including top clips, base plates and would include a genuine ranger plate for each.
 
Looking to sell all 6 in one go, at least initially.
 
Asking for £270 including postage and PayPal.
 
Cheers,
Alex

Hi folks,
 
As the title would suggests looking for an AK-105 of some description. Flexible budget depending on brand/aftermarket parts which are installed/included. Shoot me a message with what you have!
 
On another ZenitCo binge at the moment so the more of that included the better!
 
Cheers,
Alex

Hi folks,
 
Parting with this beauty, details are below:
 
Externals:
Laylax lower receiver with correct engravings
Replica CAR15 stock
Replica Marui Broomhandle Vert Grip
Prometheus trigger pin
Magic pin to keep the receivers tight
G&P Storm Grip
Per Mike Suppressor (also functioning as a barrel extension currently)
Replica ACOG with wing mount and pigbacked RMR (unsure of brands on either, both a good quality as far as I can tell)
LCF L119A1 Castle Nut
Outer barrel machined to the correct length
 
Internals:
Front Wired Gate Titan Advanced (currently set for safe, semi, 3 shot burst on tap full auto on hold happy to change should the buyer have a preference)
Prometheus Piston Head
Prometheus Piston
Prometheus Spring Guide
Prometheus Cylinder Head
Prometheus Nozzle
Prometheus Cylinder
Prometheus Gear Set
Prometheus 6.03 Inner Barrel (unsure of length, does run into suppressor as shown in photos)
Prometheus Tappet Plate
Lonex Hop Unit
ZCI High Torque Motor
Airlabs Sorbo Pad
Eagle6 Spring
 
Power wise with hop set for 0.32g BBs it's averaging 260fps on a 0.32g BB, landing it bang on 1J.
 
Accessories:
2x PEQ Battery Boxes (if collected I will include batteries, but following restrictions listed they cannot be shipped)
1x Marui 82rnd midcap (I have additional available should the buyer want more, listed price only include the single one though)
 
Please note I do not have the original box, so should shipping be required it will be posted in a blank box of some description.
 
Price wise:
 
£650 including PayPal fees and postage.
 
Postage will be via Parcelforce 48, happy to meet up/potentially deliver depending on your location.

Hi folks,
 
Have a B5 Systems SOPMOD Bravo Stock in black up for grabs. Fits milspec stock tubes, superb condition. Very comfy, at least for my face, just a little wider than I prefer these days (this is the slimmer version without the battery storage tubes). I can remove the ranger band or leave it on there, entirely upto the buyer.
 
Looking for £60 including PayPal fees and shipping. Please note that I'm currently limiting myself to one post run per week, these tend to fall on Wednesdays.

Hi folks,
 
Picked this up as part of a bundle, I already have 4 Glocks so this is something I'm looking to move on.
 
Everything seems to work as it should in regard to function and the mags all hold gas, though given the age I imagine everything would benefit from a once over from someone that knows what they're doing.
 
Doesn't have the weird rail section that looks to fit on the front, outside of that everything is present and correct (including paperwork, what I assume is a hop adjustment tool and what I assume is a speedload attachment of some description). Condition wise the photos below do a better job than I ccould do with words, I'd probably go with 'decent condition but definitely used'.
 
Looking for £120 including PayPal fees and postage.
 
Please note that I'm currently limiting myself to one post run per week, these tend to fall on Wednesdays.
 
All the mags will be emptied when packaging up for shipping and marked as 'empty/depressurised vessels', this is for safety reasons. Be sure to get some gas in them as soon as they arrive to best prevent leaks occuring, this is simply the nature of shipping GBB mags unfortunately.

Hi folks,

Long story short, ordered these for a project which I'm not longer pursuing, couldn't cancel the order in time and the returns process is more hassle and cost than it's worth. I'm not one to claim anything sold on a forum is 'brand new', but suffice to say these are all as close as you could get to 'brand new' via a private sale. All items are in unopened packaging, bar the handguards which were removed from their boxes for photo purposes. The list is as follows all prices are including PayPal fees and shipping:
 
To reiterate for the sake of clarity, all items below are replicas.
 
5KU B-11U Handguard for AKS-74U replica -SOLD
5KU B19N Top Rail replica - SOLD
2x TWI Long RIS Rail for Zenitco handguards (75mm) replica - SOLD
TWI RP-1 Charging Handle replica - SOLD
LCT ZDTK-2 Steel Muzzle Device (24mm thread) replica - SOLD
5x Cyma AK74 Midcaps - SOLD
 
Parts are listed on various websites as being able to fit a variety of AKS74U replicas, some requiring modification. I can't comment on this because as stated I haven't tried to fit anything to anything, so buyer beware (more specifically with the handguards) that there may be a need to modify either the after market part or your RIF to get a correct fitment.
 
Cheers,
Alex