Pewpewpetie

Inner barrel stability is great, I'll try the adjustable nozzle maybe and see if it's ever so slightly short and thus not correctly seating each bb the same

I've got an adjustable nozzle so I'll try that and see if length has anything to do with it. My only guess is that the nozzle is sealing fine but is slightly too short , meaning bbs aren't being seated correctly or consistently

Yes I've even tried different barrels, the only other thing I was thinking is could the nozzle not be setting each bb correctly between shots Or although it feeds flawlessly could nozzle length cause this, maybe nozzle is pushing to far into hop and pushing the hop arm? I'm really out of ideas

Hi all, have an m4 I'm having issues with the hop. I have tried everything from standard prommy purple, maple leaf and s hop, all do the same.. I have a consistent 330/331fps on 0.2g but every shot is different, the bbs fly perfectly straight but the vertical action of the bbs changes every shot, some go 6ft higher then others, what could be causing these random shots? Could nozzle length affect this? Can't think what else would cause this. I've also tried different hops, standard cyma, zci and a prowin Or could it be a tappet plate problem not resetting the bb in correct place on each shot?

The gun I'm using though has been fully upgraded with no bad upgraded parts,i.e prommy barrel, maple rubber etc, also have etu/mosfet, with this set up. it makes no sense as previously mentioned it's very consistent fps, accuracy, has a decent barrel hop and bucking. Don't understand what more could really be done. Also I use the asg 0.28g devil bb I believe I'm coming in around 0.95j.

Gun has had plenty of work. I.e barrel, hop, very consistent air seal( internally and nozzle to hop) 1 fps fluctuation every five or so shots. 65m is around 212ft, I'm falling 40ft short of that

Hi all, I'm sure this topics been discussed previously somewhere but what range should you expect from your aegs at 330-350fps on 0.2g... I ask because I read somewhere that someone's aeg at 340fps was hitting targets reliably at 200ft( can't remember where). My classic army scarab, which has a very consistent 330/331fps , prommy barrel , retro arms hop, maple leaf 60° and omega nub, will only hit 160/180ft reliably(Google maps) if I aim higher then said target. Is there anything that can really be done to up the range( considering I've done pretty much everything). I have no issues with hop(everything flies perfectly straight) also I use 0.28g when playing

Alot of work getting it to fit, now the trigger trolly isn't resetting fully against the trigger. Shoots semi but have to fire and reasle trigger quickly to allow trolly to drop back into place. VID_20210909_183141.mp4

Issue resolved. The col wasnt sitting flat due to the shell. I've filed the part down so now it doesn't engage the col when in semi

Hi again all, strange issue with an ak build I'm working on. Semi is working fine but when I try and put it in full auto it's as if the COL won't let the trigger past. VID_20210909_143219.mp4 VID_20210909_143741.mp4 It's as if the col lever is rubbing the bottom of the trigger side

Already own an ak and not a great fan of ak styled varients.i was after something a little different, range and accuracy wise. Just say I have hk416 with prowin hop, prommy purple and zci barrel 363mm shooting at 335 on a 0.2, and the ssg with prowin, prommy purple and 210mm zci barrel shooting at 335fps, will the range and accuracy be the same? Or will I be Completely out gunned at med/long ranges (100ft/200ft)

Hi all, have a quick question. I'm used to playing dmr roles and standard m4 aegs. I've recently switched to a dye mask and getting behind the scope is a nightmare. I was looking for a lightweight pew pew, the ssg1 seems great due to its light and position of stock allows masks with ease. My question is, if I replaced bucking and barrel keeping it 210mm long, would It still be as accurate as an m4 variant with 363mm barrel, meaning would I still be hitting shots at same distance?