Jacket
-
Posts
155 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Jacket
-
Tested today, 270fps on .3 and 238fps on .4 with ASG ultra air at about 6 degrees
-
Haven’t tested yet, but range is as good as stock 250mm barrel
-
Troy M7A1 PDW mostly complete. G&P Troy PDW stock Madbull Troy TRX 7” rail 5KU 7” outer barrel Laylax Nineball 162.5mm inner barrel 6.03 Everything else stock apart from the biro mod. Will lift a .45 Bb to 70m Just got to get a red dot and different flash hider, and keep my eyes peeled for a Dytac 7.5” silver barrel
-
4 mags - 1,in the gun, 1 in leg pocket and 2 in a pouch on belt. I like to travel light
-
This batch seemed to last quite a while. They should get in 200 a time
-
Are PDI barrels generally a good cut out size/shape? I’ve had the Laylax 250mm one before which was fine
-
I’m building a Troy m7a1 which will have a 7.5" outer barrel. Looking at either an MP7 or Hicapa 7" Precision inner barrel rather than chopping down a longer one. Has anyone fitted a MWS with either of these - was there much drop in FPS and accuracy? Currently looking at these 3
-
This advert is COMPLETED!
- For sale
- Used
Complete front end from a TM MWS CQBR - RIS, outer barrel, foresight, delta ring, barrel nut, flash hider. Does NOT include inner barrel or HOP unit. Excellent condition, skirmished 5 times. Very light marks. Ideal to turn your MTR into a MWS. £85 posted, no splits. MWS buffer tube, spring and plastic buffer. Also comes with CQBR sling plate and little silver bit. Good condition bar some scuffing to the castle nut from removing it with adjustable grips. £30 posted. £100 posted for the lot£85
-
Phase 1 of my Troy M7A1 PDW build.
-
Anyone have experience with the PDW style sliding stocks? Do they still allow the rifle to cycle reliably, any loss/increase in recoil strength?
-
Anyone got one of these going spare or know of anywhere with stock?
-
1, yes bolts are interchangeable 2, pretty sure there are gold ones if you’re that way inclined 3, if you’re going to change most of the parts then the MWS is £100 cheaper
-
Mags back in stock at Firesupport if anyone has been waiting
-
Not underneath the cardboard insert that the rifle sits in? They are hidden away
-
I sold number 4 recently to buy an SRS, already thinking about number 5
-
Like it. Is that rail buy Madbull? Thinking of getting the same, did it go on ok?
-
Couple of upgrades / spares just put up in the classifieds
-
The inner barrel on both is 250mm so no difference in performance. The normal MWS can take upto a 370mm barrel
-
Has anyone had trouble threading aftermarket barrel nuts into the mws receiver? I had a madbull Viking rail and could only get it threaded in about 1/4 of the way. Didn’t want to start retreading things so sent in back and put my normal front end back on
-
Just put 3 up in the classifieds
-
Only keeping 5, the top rifle is being sold with 4 and going to sell another 3 separately. Too heavy carrying all them
-
Just put some MWS specific bits up in the classifieds if anyone is interested 😀
-
Wow that’s a few quids worth there!
-
Planning on changing the externals to a Troy rail and Hogue pistol grip. Standard Block1 parts up for sale if anyone wants to turn their MWS into something shorter
