[LCT G3 - LC3A3. Review and Upgrade Review.]

Luckily not with my local site where there is a DMR limit of 500 FPS /single action/30 yard engagement. 

[LCT G3 - LC3A3. Review and Upgrade Review.]

I have just put a 130 in mine and im getting around 420 ish which i feel is low for this  spring (was hoping for around 470) so you may be able to get away with 120.

[LCT G3 - LC3A3. Review and Upgrade Review.]

1 minute ago, Iceni said:

Nope I put in a basic mosfet. Xcortech x304u.

I personally don't see the point in a Titan, It's a great device in theory but for me I don't need the features it brings or the install fun.

I run 7.4v 2000mAh 25/50c batteries in the G3. So I'm not pushing the gearbox hard, The basic fet does the only thing I need it to do and that is protect the contacts.

If I want a better trigger response I'll upgrade the motor to a 35K and perhaps looks for a 130+amp battery that fits. That should boost it into the 25rps range. Outside of that all of my gearboxes are pretty basic,  I don't add upgrades that are going to significantly shorten the service period.

If you need Titan specific information you would be better served by making your own thread in the "Electric guns" section.
https://airsoft-forums.uk/forum/27-electric-guns/

 

Ah thanks, Had a late night and got it all sorted out.

For others -  info that might be of use - I used a sharpie to black out the selector plate and then all worked just fine.

I'm also running similar battery though I just put in a 130 spring as I'm pretty sure mine came with a 90 (300fps on .2's  - UK spec according to LCT).

Accurate range now is unbelievable though I think I'm pushing up around 460 fps - will crono later on, motor is getting a little warm.

[LCT G3 - LC3A3. Review and Upgrade Review.]

Ordered

Iceni - did you end up putting in a Gate Titan - just got mine in and having issues with the selector - just cant get it to register , blacked out all i can but no dice

[LCT G3 - LC3A3. Review and Upgrade Review.]

14 hours ago, Iceni said:

There was no correction, it was a straight swap. The LCT one was visibly warped. The ASG one that replaced it went in without needing any modification.

I got my sling from Zib militaria with the muzzle protector. Wasn't expensive but it looks nice and was in good condition.

http://www.zib-militaria.de/epages/61431412.sf/en_GB/?ObjectPath=/Shops/61431412/Products/100499

 

 

Zibs nice n cheep though they have a minimum spend order so if anyone else wants a sling in the UK let me know and I'll order a bunch.

Very tempted to get the real wood fore-grip and stock - you gun looks superb Iceni.

[LCT G3 - LC3A3. Review and Upgrade Review.]

Nice writeup Iceni  - I have the G3 and its definitely very well put together, not had any feed issues yet with the midcap but the the fps is certainly low.

Just ordered a Gate Titan to put in so will take a peek internally then though not to sure on tappet plate corrections - could you elaborate a little?

Planning to put in a 130 to lift up the fps a bit to  (looking for around 450-475) so I can use this as a true dmr, factory fitted 120's get you to about 430-450 apparently (USA market).

 

Looking for slings now :)