Jump to content

BADGERF1ST

Members
  • Posts

    365
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by BADGERF1ST

  1. Time Left: 1 day and 16 hours

    • For sale
    • Used

    Medium sized hard case for rifles and SMG's. Foam is in perfect condition with no tears or damage. Internal compartment measures 31.5 Inch by 10.5 Inch. For reference it will hold an L119A2 with silencer fitted and stock collapsed. Will leave the stickers on unless asked to remove them. £40 including postage and PayPal.

    £40

    Snodland, Kent - GB

  2. This advert is COMPLETED!

    • For sale
    • Used

    Unfortunately due to poor health and mounting bills, I'm parting with the one thing I told myself I never would, my fully loaded, fully upgraded, HAO L119A2 and extremely rare HAO FA556SA suppressor (hardcore version). Condition wise, it has never been skirmished and has been purely a display piece and something of a hobby in itself. As such it is in great condition. The only cosmetic marks are a few scratches on the lower and upper rails, under the rail cover and PEQ box. Otherwise it's all cleaned, lubed and good to go. As it has had such little use it will more than likely need bedding in, the hop setting up, the sight zeroing etc. I also suspect it to be running a little hot due to the fitted G&P adjustable red valve and the 6.01 barrel combo, replacing the valve with stock Marui or similar will bring it in line. Built from a standard MWS and based on the rifle used by Jay_Cal87 which features some slightly different parts to the standard L119A2 set up. What you get - Everything seen in the pictures, full build list below. External Parts - HAO's L119A2 full kit for Marui MWS, HAO's FA556SA suppressor (hardcore version, made of steel with actual baffles), HAO's Geissele trigger pin set (recessed as on the real steel), Magpul CTR stock - Genuine, Magpul K2 grip - Genuine, Magpul ASAP QD sling plate - Genuine, Magpul enhanced trigger guard - Genuine, Magpul B.A.D lever - Genuine, Magpul RSA sling mount - Genuine, Arisaka finger stop - Genuine, Manta rail panel - Genuine, Guns Modify Geissele Airborne charging handle repro, Angry Gun steel dust cover, Angry Gun steel forward assist, SpecPrecision Unity Hot Button repro, SpecPrecision Unity Micro Hub repro, SpecPrecision Modlite OKW 18350 torch repro, Spec Precision Unity Micro T2 mount repro, SpecPrecision Aimpoint 3xMag-1 repro, Wadsn Unity FTC magnifier mount repro, Holy Warrior Aimpoint T2 repro, Element PEQ with correct stickers, PTS low profile Steel QD sling adapter, 2x Ace 1 Arms P-Mags (both have slow leaks) fitted with Taran Tactical repro magazine extensions, Repro Magpul MS3 sling, Box of CR123 batteries. Also included are the tools required for barrel removal and a castle nut wrench, as well as all of the packaging I've retained from building it. Internal Parts - Tokyo Marui OEM hop unit and adjuster with standard Marui rubber and SixG Super Nub, PDI 6.01 Steel inner barrel, Angry Gun Steel bolt carrier, G&P CNC trigger box full set with lightweight ZET plate and bolt catch, BJ Tac Steel trigger with Geissele marking, G&P Aluminium buffer V2 with adjustable weight, Angry Gun 130% recoil spring, G&P reinforced nozzle set with G&P power adjustable red nozzle (to be completely transparent I believe this nozzle, even at it lowest setting, will run hot and will likely need to be replaced with a standard TM or similar nozzle for game use). All in all this has cost a small fortune and taken 2 years of constant tinkering and attention to detail and is a proper one off. Asking £1250 for everything, collection from Snodland in Kent would be preffered, however shipping can be arranged at buyers cost, just note it will be quite expensive due to the value, this isn't something I would want to send uninsured. Any questions please feel free to ask and thanks for taking the time to slog through all this!

    £1,250

    Snodland, Kent - GB

  3. Time Left: 3 days and 14 hours

    • For sale
    • Used

    Helmet stand in Dark Earth. Constructed from plastic, but is good and solid with no creaks or wobbles, had my 2.5 kilo helmet set up stored on it for a fair while with no issues. Height is adjustable via removal of segments from the middle. £20 including postage and PayPal.

    £20

    Snodland, Kent - GB

  4. This advert is COMPLETED!

    • For sale
    • As new

    Brand new SpecPrecision Unity FAST FTC 30mm magnifier mount in black. No damage or scratches, solid lock up and lovely flat black finish with good trademarks. £25 including First Class postage and PayPal fees.

    £25

    Snodland, Kent - GB

  5. Time Left: 1 day and 13 hours

    • For sale
    • As new

    Emerson Crye Gen 2 style combat trousers in Multicam. Fitted with Gen 3 kneepads. Unworn outside of trying them on upon delivery, since then they've been folded up in a wardrobe. Measurements, taken with a tape measure are 32 inches around the waist and 31 inches from crotch to bottom of the leg. £45 including postage and PayPal.

    £45

    Snodland, Kent - GB

  6. This advert is COMPLETED!

    • For sale
    • As new

    Selling my full modernish SAS themed loadout due to finishing it just in time for my health to worsen and for me to have to give up the hobby, as such it's never been fielded and deserves a new home. Everything was chosen from a variety of reference pictures and research material and should give a suitable impression from the era shortly before the replacement of the L119A2. All purchased brand new and has only been on display. What you get - Emerson Crye Precision style MRB belt in Multicam, size S-M (currently set up for about a 32 waist but plenty of adjustment left), Genuine Mechanix Fast Fit gloves in brown, size M, Genuine Blue Force Gear 'Boo Boo Pouch', Multicam, 2x Warrior Assault Systems elastic 9mm pistol mag pouch in Multicam, Tactical Tailor flashbang pouch in Multicam, FMA Blue Force Gear style trauma kit (loaded with basic medical supplies), TMC Safariland 6354DO style holster for Glock 17/19 with X-300 torch, with lowride adapter and strap, Multicam, ITM Nexus Grimloc carabiner in Dark Earth, Bundle of Cyalume green chemlights. All in all cost around £200 to put together, I'm asking for £115 including postage and PayPal.

    £115

    Snodland, Kent - GB

  7. Time Left: 1 day and 13 hours

    • For sale
    • As new

    Selling my full modernish SAS themed loadout due to finishing it just in time for my health to worsen and for me to have to give up the hobby, as such it's never been fielded and deserves a new home. Everything was chosen from a variety of reference pictures and research material and should give a suitable impression from the era shortly before the replacement of the L119A2. All purchased brand new, and has only been on display. What you get - Size M-L FMA Fast helmet carbon fibre version (good weight and heft, definitely not cheap and flimsy) with Dark Earth shell, fitted with the upgraded padding kit, FMA Helstar 6 gen 2 Dark Earth (blue light and infrared) with 'attach patch', FMA dummy PVS-15 night vision with upgrade blue lenses, Z Tac Comtac II headset in Olive Green with FMA mounts in Dark Earth, TMC Odin Design Group style helmet cover in Multicam, SOTAC Wilcox L4G24 night vision mount in Dark Earth (metal version), Night Evolution Princeton Tech style MPLS in Dark Earth (single LED, white light), Emerson Ops Core style counterweight pouch with weights in Dark Earth, 1 Union Flag and 1 'Warfighter' patch. All in all this cost over £300 to put together, I'm asking £200 including postage and PayPal. Stand NOT included. - Edited as I forgot to mention that the headset IS included in the sale -

    £200

    Snodland, Kent - GB

  8. This advert is COMPLETED!

    • For sale
    • Used

    Selling my full modernish SAS themed loadout due to finishing it just in time for my health to worsen and for me to have to give up the hobby, as such it's never been fielded and deserves a new home. Everything was chosen from a variety of reference pictures and research material and should give a suitable impression from the era shortly before the replacement of the L119A2. What you get - Full AVS set up, built upon a Multicam Emerson AVS. These are listed as one size fits all and have a good range of size adjustment options. Plate bags are a size medium and come fitted with rubber training plates. The harness does have a couple of folds on the arms near the side plate bags, however this doesn't affect the fit, and the elastic cord adjustment has had the excess cut off flush with the adjuster (currently set up for about a 40 inch chest with room for jacket etc, if you're much bigger you'll need a longer length of cord). Everything else is in brand new condition. Comes with the following - Emerson AVS fitted with hard rubber plates (about 1kg each), Emerson CP style triple .556 front flap, Emerson CP style side plate pouches with soft foam plates, Emerson CP style AVS zip on pack, Emerson CP style side pull double .556 mag pouch (fitted below the backpack), Genuine Crye Precision shoulder buckle and side quick release kit from the AVS upgrade pack, Genuine Crye Precision Airlite radio pouch, Genuine Ferro Concepts mini dangler in Multicam, Genuine Source 1l hydration bladder and hose (brand new, never drank from) and ITM Nexus Grimloc carabiner for hose retention, Dummy radio and extended antenna, Working PTT replica and retainer, Tourniquet and shears, 2x Union Flag patches, Bag of odds and sods including the emergency doff cable for the carrier. All in all cost me around £350 to put together, asking for £200 including postage and PayPal.

    £200

    Snodland, Kent - GB

  9. This advert is COMPLETED!

    • Wanted
    • Used or as new

    As above, looking for a fully working Evolution Gear Comp M5 repro (the OG, not the M5B or M5S). Preferably in newish condition, and with lense covers and box if possible please. Many thanks.

    NO VALUE SPECIFIED

    Snodland, Kent - GB

  10. This advert is COMPLETED!

    • For sale
    • As new

    Brand new Combat Arms Accessories FFG2 folding foregrip. Seen in use with UKSF and fitted to the L129A1 marksman rifle. 3 position folding, storage compartment with rubber cap, comes with original packaging (a bit ratty) and Allen key for fitting. £17.50 including First Class postage and PayPal fees.

    £17.50

    Snodland, Kent - GB

  11. This advert is COMPLETED!

    • For sale
    • Used

    Lightly used, replica Larue Tactical handstop kit. Black polymer. Slide over your Picatinny rail and hold in place with one index clip each side. Kit includes 2x handstop with trademarks, 4x index clips with cable clips, 4x index clips with alternate cable clips, and a ton of standard index clips with correct bump texture. - £12.50 Price includes postage and PayPal.

    £12.50

    Snodland, Kent - GB

  12. This advert is COMPLETED!

    • For sale
    • Used

    Genuine Magpul XTM handstop kit in lightly used condition, no damage or marks, in black - £17.50 Price includes postage and PayPal.

    £17.50

    Snodland, Kent - GB

  13. This advert is COMPLETED!

    • For sale
    • As new

    Brand new replica Unity QD lever. Steel made, with Unity's correct nut (no slot), Unity trademark and patent engraving. Compatible with either the FAST micro for the T2 or the Eotech riser with pre drilled hole for the nut, if in doubt, if your mount has a hexagonal hole between the mounting screws this will fit. Will also fit anything else with QD compatibility. £12.50 including 1st Class postage and PayPal.

    £12.50

    Snodland, Kent - GB

  14. This advert is COMPLETED!

    • For sale
    • Used

    Sotac M300V with RM45 mount and clicky tailcap only (Battery Included, tape switch and end cap NOT included). Good, barely used condition, having a switch up on my collectors rifle. Twist the head to switch modes, white light, off and IR (actual, working IR, no strobe). - £35 Price includes postage and PayPal.

    £35

    Snodland, Kent - GB

  15. This advert is COMPLETED!

    • For sale
    • As new

    Brand new Unity Modbutton Lite replica in Black for Surefire and Modlite style torches - £12.50 Price includes postage and PayPal.

    £12.50

    Snodland, Kent - GB

  16. This advert is COMPLETED!

    • For sale
    • Used

    HAO's L119A2 charging handle for Marui MWS. From my HAO L119A2 kit, in very lightly used condition as it's a stay at home rifle. Made of CNC 6065 Aluminium with hardened Steel latch. Superb quality as always from HAO - £20 Price includes postage and PayPal.

    £20

    Snodland, Kent - GB

  17. This advert is COMPLETED!

    • For sale
    • As new

    Brand new SpecPrecision Modbutton with offset torch mount, in black, with full correct trades and plug, CNC Aluminum - £18 Price includes postage and PayPal.

    £18

    Snodland, Kent - GB

  18. This advert is COMPLETED!

    • For sale
    • As new

    Genuine Magpul M-LOK QD sling mount, very light use, not a scratch on it - £18 Price includes postage and PayPal.

    £18

    Snodland, Kent - GB

  19. This advert is COMPLETED!

    • For sale
    • Used

    G&P replica TwistMount for 3xMAG and other 30mm magnifiers. Correct screw used for fastening, 1.41" centre line height. - £20 Price includes postage and PayPal.

    £20

    Snodland, Kent - GB

  20. This advert is COMPLETED!

    • For sale
    • Used

    Genuine Magpul ASAP sling plate in lightly used condition, not a scratch on it. Fits Real Steel and GBB AR15 rifles, can't confirm for AEG as I don't own any. Comes with fittings for commercial and milspec buffer tubes. £30 including postage and PayPal.

    £30

    Snodland, Kent - GB

  21. This advert is COMPLETED!

    • Wanted
    • Used or as new

    As above, looking for a WADSN FAST FTC mount for 30mm magnifiers. Must be the WADSN version please (it seems to be the only version that closes flush with the base of the mount like in the picture), and must be black and trademarked please. Thanks in advance.

    NO VALUE SPECIFIED

  22. This advert is COMPLETED!

    • Wanted
    • Used or as new

    After an Arisaka finger stop for Picatinny rails. Much appreciated.

    NO VALUE SPECIFIED

  23. This advert is COMPLETED!

    • For sale
    • As new

    Holy Warrior S-1 (EXPS-3) in Flat Dark Earth. Includes a Repro FAST riser with a Steel QD lever upgrade (replaces the screw mount), and a Multicam skin. All items are in like new condition, assembled, fitted to my display rifle for a few pictures, disassembled, and back in the box, not a scratch. Parting ways as I prefer the low profile look of a T-2. Honestly one of the best quality repro's I've had the joy of handling, the finish is absolutely gorgeous, good clear reticle, next to zero parallax and NV compatible. £125 including Special Delivery and PayPal fees.

    £125

    Snodland, Kent - GB

  24. This advert is COMPLETED!

    • For sale
    • As new

    Brand new SpecPrecision Multicam skin to fit the Holy Warrior S-1. May fit other Eotech EXPS3 replicas, however I can't guarantee compatibility. Ideal if you don't want to commit to painting your sight, and easily removable - £8 Price includes postage and PayPal.

    £8

    Snodland, Kent - GB

  25. This advert is COMPLETED!

    • Wanted
    • Used or as new

    As above, looking for a good condition Dytac SLR MOD 3 handstop for picatinny rail. Much appreciated.

    NO VALUE SPECIFIED

    Snodland, Kent - GB

×
×
  • Create New...