• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.
AK47frizzle

AK47frizzle

Members 28
Joined
Last seen
Messages
1,457
Feedback score
+1 /0 /-0
Reaction score
483
Points
83

Profile posts Latest activity Postings Classifieds feedback About Post areas

  • AK47frizzle
    What's a good drop-in hop chamber + barrel combo for an m4? Need to change mine.

    View previous comments…
    AK47frizzle
    AK47frizzle
    Decided to go try something new and got a zci 229mm, zci plastic hop and a guarder sp100 spring (mine is a 110 currently) from ak2m4. Was heavily debating between a pdi/prommy barrel or the zci solution, but decided for the zci route as i'd fix 2 things in one go (prowin+shitty madbull barrel) at more than half the cost instead of getting a new the barrel and potentially still having it not work because of the prowin fitment issues. Both zci products came at just over £20.

    AK47frizzle
    AK47frizzle
    Ok, zci setup is top notch. Works perfectly. Although, it over hops 0.2gs at its minimal setting at 20m, so might need to use heavier ammo or downgrade fps.

    Adolf Hamster
    Adolf Hamster
    Overhopping is gods way of telling you your ammo isnt heavy enough.....

    AK47frizzle
    Messaged Silverback on the MDR... "Nothing". Sad times.

    Druid799
    Druid799
    You actually expected an Airsoft manufacture to reply to you ? Oh you poor deluded fool ! ?

    AK47frizzle
    AK47frizzle
    No, they actually did. They replied with "Nothing". :(

    Druid799
    Druid799
    Well bugger ! thought you ment no reply to your message . ?

    AK47frizzle
    £420 for VFC MP7 AEG. Tempted. Maybe. 

    View previous comments…
    M
    Musica
    My marshals get a bit panicy when real bullets start flying in the mix of bbs.

    AK47frizzle
    AK47frizzle
    I have a lot of spare bucks from frugal living, so it is doable for me. But, what put me off is the 4 gear whine with completely proprietary parts. Not even side rails with it? Shame. Maybe it'll get aftermarket support because having full aeg performance in such a small, aesthetically pleasing package is what I want.

    P
    Prisce
    The amount isn’t the issue, the issue is the amount for exactly what you have just described, I spent similar on my custom and that’s a lot better than this. 

    I suppose the price will drop if people start buying them in bulk.

    AK47frizzle
    If i want my ukara registered at another site, do i have to play 3 games there?

    Asomodai
    Asomodai
    Yes. If you are moving from a site operated by the same people as the new site, you might be able to just play one game and transfer. But usually three games for any new site. 

    AK47frizzle
    I don't understand piston head upgrades in GBB pistols. What are they actually supposed to do? I haven't seen any results from my hk45 or p99.

    RMDavis
    RMDavis
    But... They are nice and shiny! ? In all honesty mate I don't think they do sod all apart from lighten our wallets, and give us an excuse to stripdown a gun and replace perfectly good parts.

    I had a TM PX4 that I fitted a inner barrel and and a new piston head to. Comparing it with my completely stock TM HK45T it did not shoot any better whatsoever. 

    I've decided to not touch my 45 and just leave it as it is. It works perfectly, and I really doubt I can get much more performance from it. 

    The only thing I have done is fitted the purple gas routers for the mags, but I took those from the PX4 mags. Not sure if they do anything either, probably another case of 'upgrading' for the sake of it... 

    AK47frizzle
    AK47frizzle
    I've put in purple gas routers too for my hk45. In addition, some laylax neo-r bullet valves, because you still get the same amount of shots (3 mags) but at slightly higher velocities (+12 fps); it doesn't have 4 ports like a normal valves, just a big one like a semi circle and directs all the gas upwards instead of all over the place. The neo-r valve is also adjustable in power which is cool af.

    Those 2 and a maple leaf autobot have made it an even better beast.

    AK47frizzle
    Fuck. There just aren't enough good CO2 guns out there. Capsules are just so much more convenient to carry and performs better.

    Adolf Hamster
    Adolf Hamster
    More magazines?

    I have 3 for the makarov and 2 for the hicapa and it's very rare they ever get used unless i run out of rifle ammo and switch or if i've lent it to someone who's doing the same.

    AK47frizzle
    AK47frizzle
    Not even magazines, just raw gas performance. Also doesn't spew liquid gas as badly when you tilt the gun downwards. Performance in temperature in addition too.

    AK47frizzle
    So, i did yolo buy the WE P99 just out of curiosity... and it is actually a good gun in general. I'll write a review soon.

    AK47frizzle
    View previous comments…
    AK47frizzle
    AK47frizzle
    Apparently has 15mm bbu,  glock-like internals and a sale too. Sounds like upgrade potential. 

    S
    StayOnTarget
    Because we didnt want you to buy a WE pile of crap thats maybe on clearance sale for a reason? Enjoy that HK45 mucka much much nicer ?

    S
    sonofsammo
    I've never shot the WE, but I have shot the RS P99.
    And it's shite.
    HK45 - an excellent choice and you can't go wrong dude ?

    AK47frizzle
    I know i've probably dragged this on... But, holy shit. Been avoiding TM all this time and never thought a plastic slide pistol from a japanese company would be this good.

    AK47frizzle
    AK47frizzle
    Ok, my hk45 can get through 85 rounds on one fill in room temperature. We'll see what gas routers and various piston upgrades will do to it. I wonder if i can get at least 100 rounds like my co2 g18c used to do.

    Cipher-032
    Cipher-032
    The prommey piston head doesnt work at all well for the TM HK45. AVOID. Makes it far worse.

    Look for a uprated mushroom cup piston head instead.

    AK47frizzle
    AK47frizzle
    na i'm trying out the poseidon stuff from rainbow8, as well as the nine ball one.

    AK47frizzle
    How good is the tm hk45? Very tempted on one. How does it fair in cold weather?

    AK47frizzle
    View previous comments…
    I
    Immortal
    It's an M712 Broomhandle Mauser in disguise.

    S
    StayOnTarget
    It costs the same as my entire airsoft kit,it looks crap too and will probably still need upgrades,that always makes me shake my head when I see £1000+ RIFS 

    that still need stuff done to them...what a con

    Adolf Hamster
    Adolf Hamster
    How much!?

    Jesus christ, i'm sorry but coating an otherwise at least iconic gun in superglue and chucking it in a bin of "shit 3-gun people think is important" does not justify that.

    AK47frizzle
    So I ordered a product to an address that I got kicked out of (flatemate left, can't pay all). What can I do about it?

    View previous comments…
    AK47frizzle
    AK47frizzle
    It is an rif... unfortunately it was dispatched before i knew I was getting kicked. It was from JKarmy and they said they couldn't do anything about it. So, i'm hoping the customs letter will go to that address, no one will pay it, then it'll get send back to jkarmy and I get a refund. What an unfortunate turn of events.

    Nick G
    Nick G
    That's assuming there is a customs letter, it could just pass customs and go out for delivery. Are you on speaking terms with the old landlord ? will he forward post to you ? Who is the courier ? it may be worth contacting them to see if you can arrange alternate delivery, or collection from a depot. Even if the RIF gets sent back it's going to cost you in postage, and I'm not sure what customs do with items where duty is requested and not paid , but I wouldn't count on them bothering to return to sender.

    Mad Rag
    Mad Rag
    AK47frizzle
    HK postal services suspended until further notice... really now? 

    View previous comments…
    AK47frizzle
    AK47frizzle
    AHAHA I totally forgot about that until my parents told me just now

    Nick G
    Nick G
    Am I the only one who saw HK and thought Heckler and Koch ?

    S
    sonofsammo
    I deal with a company in HK and their yearly email said they'd be open again from the 8th - I"m guessing it'll be the same for a lot of them.

  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top