• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The AAP-01 Owners Thread.

AlphaBear said:
Unfortunately I don’t have any HPA gear so wouldn’t know how to tap the darn thing. Roll on YouTube I guess.
 

Is the tap modification to the drum mag permanent?  
Click to expand...


Nope, It's just a fill valve replacement. If you want to take it back to gas you unscrew and pop the old valve back in.

 
Can't stand drums so can anyone recommend some extended mags that work with the AAP?

 
I've got a couple of the WE extended mags that work well! Never had any issues with them, however they haven't seen much use!

 
PopRocket123 said:
Can't stand drums so can anyone recommend some extended mags that work with the AAP?
Click to expand...
I'm using an AW one, it's working fairly well and it's €10 cheaper than them WEs.

I'll buy a couple more whenever I have some spare cash :D

 
Skara said:
I'm using an AW one, it's working fairly well and it's €10 cheaper than them WEs.

I'll buy a couple more whenever I have some spare cash :D
Click to expand...
Spare cash? Does that concept actually exists when it comes to airsoft ??

 
I’ve come to the conclusion the stock hop rubber is utter pants. The consistency between each shot is like Dolly Parton jumping up and down on a trampoline. Time to swap it out for a Sniper Mechanics Pink Flamingo 50 degrees rubber. I also have a spare H-Plate which I bought for my MK23 but don’t need to install it in the 23. Am I right in assuming it will work with the AAP’s stock hop unit?

 
Last edited by a moderator:
AlphaBear said:
I’ve come to the conclusion the stock hop rubber is utter pants. The consistency between each shot is like Dolly Parton jumping up and down on a trampoline. Time to swap it out for a Sniper Mechanics Pink Flamingo 50 degrees rubber. I also have a spare H-Plate which I bought for my MK23 but don’t need to install it in the 23. Am I right in assuming it will work with the AAP’s stock hop unit?
Click to expand...
It's not the bucking, they're actually quite good. It's the stock nozzle valve spring that needs swapping out.

 
Steveocee said:
It's not the bucking, they're actually quite good. It's the stock nozzle valve spring that needs swapping out.
Click to expand...
Ahhhh ok that could explain why at 40m it was all over the place. Is the stock hop unit ok then?

 
For me a Maple Leaf Autobot 60 Degree 2021 Silicone, just that on its own, radically changed the accuracy / grouping. Previously shown veered slight to the left and grouping was OK'ish, post the Maple Leaf swap shots were dead center and 20m or so grouping was infinitely better.

The stock hop unit is great, I saw no need to replace it.

 
AlphaBear said:
Ahhhh ok that could explain why at 40m it was all over the place. Is the stock hop unit ok then?
Click to expand...


Yeah it's really quite good. A h plate does wonders if you want to hop .4+ as well.

Modify tan bucking would be really with a punt, have to ask yourself though, does your pistol need to fling a .4 out 60+ metres if it's not a DMR?

 
Finally at a game day, filled up my drum mag …. Went to wind it …. Nothing happened

unloaded it, fresh bb’s etc … still won’t wind, winder just spins

stripped it …

View attachment 77190

outer looks ok ….

View attachment 77191

ah! … that missing gear on the winder … that’ll do it ?‍??

 
Steveocee said:
Yeah it's really quite good. A h plate does wonders if you want to hop .4+ as well.

Modify tan bucking would be really with a punt, have to ask yourself though, does your pistol need to fling a .4 out 60+ metres if it's not a DMR?
Click to expand...
 That’s what my MK23 can do. The AAP is here just for  giggles ? to be fair. It’s gonna be my HPA experiment at some point ??  
 

Incidentally out of all my pistols I use my HK45 as my preferred backup. I just prefer the look and feel of it. 

sp00n said:
Finally at a game day, filled up my drum mag …. Went to wind it …. Nothing happened

unloaded it, fresh bb’s etc … still won’t wind, winder just spins

stripped it …

View attachment 77190

outer looks ok ….

View attachment 77191

ah! … that missing gear on the winder … that’ll do it ?‍??
Click to expand...
Blimey. You should drop AW a mail and show them this. This shouldn’t be happening. 

 
AlphaBear said:
340 FPS? Eh? Really? What wizardry is this? Is that on a normal barrel length? Any internal upgrades ? 
Click to expand...


Just a 150mm maple leaf crazy jet, 50 degree flamingo bucking and the CNC wheel adjustable hop unit.

 
AlphaBear said:
Damn it man. Why did you have to answer me ???

Skirmshop here I come ?
Click to expand...


FPS aside, I would highly recommend the hop unit. I love that I can have not enough hop, two clicks up too much, one click down perfect.

 
You must log in or register to reply here.

Similar threads

K
Stacatto C2 rear sight replacement?
Replies
1
Views
175
BigAl
BigAl
BRThoughts
AAP-01 standard magazine spring too weak?
Replies
7
Views
1K
Mik3F
M
Lord_Mandrake
Advice needed re: VFC/Umarex G36C V2 GBBR - HPA build
Replies
8
Views
867
ButcherBill
ButcherBill
JDesai
Aap-01 bolt binding on full auto
Replies
4
Views
1K
JDesai
JDesai
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top