Unread Classifieds since Last Visit
Showing adverts posted in for the last 14 days.
- Past hour
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
For sale here is a Cyma SVDS AEG DMR. Comes with the picatinny top rail cover and a bipod. This is a project gun that I intended to convert into SVDM, but I just don't have enough time to finish it hence the unfinished barrel modification in the front and this price. Current mod is that the barrel is cut and replaced with a 14mm thread. Was going to 3D print an SVDM barrel to connect but did not have enough time for the design Shoots all normally at 400FPS Price includes PF48 postage150.00 GBP
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
For sale here are some Sotac Zenitco laser and flashlights.This is the highest quality of Zenitco replica brand available. Selling as they are no longer needed in my project build. All new and never used. * Tan Perst 4 Green laser with KV-1P remote switch, £95 posted * Tan Klesch 2P with KV-1P remote switch and B-9K gooseneck rail, £65 posted * Black Klesch 2P with KV-1P remote switch and B-9K gooseneck rail, £65 posted65.00 GBP
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hi, Included is an evolution gear T2 on a unity riser. This T2 is a great and solid feeling repro that's quite hard to find. Looking for 80 plus shipping.80.00 GBP
Benfleet, Essex - GB
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Hi, Selling an assortment of repro GBRS Risers. Some wear as shown. Includes GBRS Hydra GBRS Lerna T1 GBRS Lerna Eotech Asking for 25 for each riser plus shipping. Happy to do a multi buy discount.Ask for price
Benfleet, Essex - GB
- Today
-
.thumb.jpg.f96dc58902701418c1a6afb3f39f9410.jpg)
Time Left: 6 days and 22 hours
- FOR SALE
- USED
Hi, Selling my Eotech EXPS3-0. Worn condition as shown, expected from an ex issued unit. Works as expected. Currently fitted with a front sight protector for skirmishing. Looking for 450 plus shipping.450.00 GBP
Benfleet, Essex - GB
-
Time Left: 6 days and 22 hours
- FOR SALE
- NEW
Here is my APFG MPX. lovely little gun, never had the chance to field it as haven’t had time. added the stock and as you can see have the choice of two, folding and colllapsing. Originally came with a shorter barrel but purchased the longer 6 inch, a 3d printed “suppressor” is attached to the ccw thread and inside is an acetech predator tracer. On top sits an Sig Sauer Romeo 5 Red Dot, and I swapped out the grip for an Sig Sauer trade grip too. im sure I have the box and original barrel in the loft but will need to confirm. ideally collection around Birmingham or can arrange a meet/dropoff. one gas tight mag included.600.00 GBP
- GB
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
Selling this rare collectible TM MWS with angry gun John Wick conversion kit and extras. The Angry Gun John Wick conversion kits were very rare when you could get them and extortionately priced. It is built around a brand new Tokyo Marui MWS Block 1 and internally it is stock MWS apart from a Modify Tan Bucking and a Layla Prometheus 370mm 6.03 barrel (the original 350mm TM Barrel is also included) and an Angry Gun NPAS so it can be used as a DMR or as a general assault rifle. The fire selection mechanism is currently unmodified so it will fire both single shot and full auto. There are also several upgrades including genuine Strike Industries Straight Trigger and Forward Assist Button, genuine BCM Pistol Grip and Foregrip. It is fitted with a Vision King 1.25 - 5 × 26 Scope with illuminated reticule. The reticule colour can be set tor Red or Blue and has multiple brightness settings. It is fitted to the Rifle with a genuine Giselle Scope mount (stupid expensive for what they are). I purchased this from somebody which was the above listing, have fitted a new NPAS as it was damaged, everything else is as listed as the quality is amazing. 3 mags included, not TM but I preferred these mags shown in photos. One does not hold gas but the other two do and shoot fine. 3d printed MWS mag loader included as well as the nuptial hard case with shadow foam insert. Acetech BlasterC tracer included as well as original angry gun compensator plus many other original MWS parts. very heavy and large so collection(Birmingham area) preferred or can arrange meet/dropoff. shows shooting at around 250fps but npas allows for higher if wanted. Can arrange more photos or videos at request.1,000.00 GBP
- GB
-
Time Left: 6 days and 22 hours
- FOR SALE
- NEW
For sale here are 2 unused geuine Magpul grips in tan color. Comes with original packaging. 1 RVG foregrip 1 MOE AK+ pistol grip £25 each Postage for extra £3 Will include postage if taking both25.00 GBP
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
For sale here is a repro Hydra mount in tan color and with trades, in very excellent condition. Comes with a repro SIG Sauer Romeo 5 red dot and a PEQ NGAL laser and flashlight by FMA. This is among the highest quality of PEQ replica available. Both fully working and in very new external conditions. Price includes postage Would much prefer selling them all together without splitting120.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
for sale vietnam m1 helmet with cover £30 including postage any question fell free to pm me30.00 GBP
-
Time Left: 6 days and 14 hours
- WANTED
- USED
Wanted Boneyard rifle or cheep rifle For a project M4 aeg Dm me what u got n price I'm london But can pay via PayPal if your willing to post60.00 GBP
- GB
- Yesterday
-
Moved -
This advert is COMPLETED!
- FOR SALE
- USED
Good condition, has glow in the dark tape that works very well for dark areas! About 40 blanks £55 collected Merseyside or £5 posted ontop (blanks not included if posting)55.00 GBP
-
Time Left: 6 days and 10 hours
- FOR SALE
- USED
Tm ngrs 416 delta stock internals not messed with, has had very little use from new as this was my back up external mods, magpul ctr modded butt plate for lipos real steal tango down foregrip Ferro concepts slingster repo m951 weapon light g&p t1 magpul epm mags weapon case bargain at this price no longer play so just sits there350.00 GBP
-
Time Left: 6 days and 10 hours
- WANTED
- USED
Looking for someone who doesn't want their stock one anymore as I cant buy it new. ThanksAsk for price
-
Time Left: 6 days and 9 hours
- FOR SALE
- USED
Gun has been used twice at a range and fired a couple of times in the garden, selling as I havnt had the time to go and play airsoft. Gun had a Perun V2 MOSFET installed and comes with 3 magazines, 2 plastic 1 metal, a pinty scope, 2 batteries 1300 & 1450 mAh, 6000 angry balls 0.20g BBS. !!DISCOUNT!! Sticker placement of the MOSFET needs adjusted which I will do B4 the gun is sold, if anyone is able to do this themselves I will sell for £210235.00 GBP
Maghaberry - GB
-
Time Left: 6 days and 9 hours
- WANTED
- USED
Looking for non working/boneyard/repair M4 Preferably metal receiver near doncaster or happy to post show me what you got 🙂Ask for price
- GB
-
This advert is COMPLETED!
- FOR SALE
- USED
Gun has been used twice at a range and fired a couple of times in the garden, selling as I havnt had the time to go and play airsoft. Gun had a Perun V2 MOSFET installed and comes with 3 magazines, 2 plastic 1 metal, a pinty scope, 2 batteries 1300 & 1450 mAh, 6000 angry balls 0.20g BBS. !!DISCOUNT!! Sticker placement of the MOSFET needs adjusted which I will do B4 the gun is sold, if anyone is able to do this themselves I will sell for £210240.00 GBP
Maghaberry - GB
-
Time Left: 6 days and 9 hours
- WANTED
- USED
As title suggestsAsk for price
-
-
Time Left: 6 days and 8 hours
- FOR SALE
- USED
Selling my used VFC/Umarex HK416 with a polarstar jack engine. I bought it used with the polarstar in it, has served me very well and has never broken but I’ve stopped playing, so now someobody else can get some fun out of it. The gun fully works and shoots great. There is a crack in the main body of the gun but this doesn’t affect performance at all and would be less then/around £40 to replace. The charging handle also doesn’t have the internals and doesn’t really open up the side flap every time, this would be around £10/£15 to replace. Aftermarket parts: •Maxx hop up •Maxx trigger and magazine release •PTS pistol grip •PTS stock •New FCU wire (blue and black) •Novritsch red dot •Nuprol front grip •Suppressor (can’t remember brand) I’m also including my hard gun case, 7.4v Li-ion battery, Black HPA line and TechT gun sav HPA lubricant. Collection in Gillingham, Dorset or I would be willing to post it using a carrier at the buyers expense. (I believe parcel force 48 is the best) Please ask any questions, also accepting offers too *At the moment I’m waiting to get my HPA tank back from my friend who fills it for me, then I will be able to send videos of it firing*300.00 GBP
Gillingham, Dorset - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
Tokyo Marui MWS for sale Tokyo Marui MWS + 3 Stanags (none leaking) Maddog DD MK18 Rail Flamingo Hop Rubber & Bavtac Nub Ratech Npas Original CQBR parts and box £500 posted500.00 GBP
Northampton - GB
-
Time Left: 6 days and 5 hours
- FOR SALE
- NEW
Please note it will take 12-14 days to make and ship. The iphone case is spray painted by me. These are the only available for iPhones 10 and above.55.00 GBP
- GB
-
Time Left: 6 days and 5 hours
- FOR SALE
- NEW
Please note it will take 9-10 days to make. Custom M81 woodland scrim40.00 GBP
-
Time Left: 6 days and 5 hours
- FOR SALE
- USED
I bought this from the classifieds last week under the assumption it was a Cyma, sadly it was a WE Aeg. The rifle itself is pretty nice, however I don't like the extras on the gearbox shell like the bolt latch etc which seem important to the case sitting in the receiver correctly. When I received it, the motor sounded like it was dying so I've replaced it with another generic V2 style motor. The hop unit has a maple leaf yellow bucking and an omega nub fitted. The inner barrel has marks to show it's been cut down, not sure why. I hollowed the stock out a bit more so that the battery connector could be pulled through should it need disassembly at any point - This was done when I replaced the Tamiya connector with a Deans style connector. The receiver had some scratches which I covered over with paint however the paint as well as a horrible CE mark, however admittedly the paint hasn't covered the CE mark very well. Will be sent with one mid cap which I received when I purchased the replica, as well as the carry handle. Price includes postage and fees. No original box etc as it was sent to me the same way. Low FPS, around 0.7J which I assume is due to the shorter inner barrel. Never got around to fixing it up when I saw the WE gearbox shell as I knew I wouldn't be keeping it. Knew I'd forget something - Not pictured but it will include a KAC style broom handle grip120.00 GBP
