Maxx pro M4P for PolarStar Engine
Maxx pro M4P for PolarStar Engine
£40
-
Advertiser
- Feedback 69 0 0 - Rating 100%
- Type of Advert For sale
- Item Condition As new
- Time Left 5 days and 16 hours -
- Quantity 1
Description
New and not used, bought for a project that never went ahead.
Apparently can be used for M4 AEG too according to a youtube review, but do your own research.
The Maxx CNC Aluminium Hopup Chamber M4P Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on HPA PolarStar Engines built on standard M4/M16 platforms.
It comes with an aluminium Rotary Dial Knob for fine hop up adjustments, the precision hop up Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.
The Hopup Chamber M4P unit is designed to accept the PolarStar HPA Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.
The Hopup Chamber M4P unit is equipped with an interchangeable Inlet Adaptor Outer Diameter 11mm to ensure the hop up unit is inserted exactly in the center of the 11mm inner bore of the AEG Gearbox or HPA nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional).
Removable CNC Brass Side Wings allow the unit to slide smoothly into the outer barrel slots, and an advanced CNC Delrin Locking C-Clip holds the inner barrel tightly in place without wobbling and twisting.
A new BB Latching System prevents BBs dropping out after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BBs from inside the hop up chamber.
Recommended Questions
There are no questions to display.