SOLD

I have here a 100% complete Specna (sort of) Edge - some assembly required - all parts to complete are included.

When I say 'Sort of' Edge - it's a Specna Edge metal body, rail, outer/inner barrel, hop unit etc. but the caveat is that the pile-o-shite Orion gearbox was sacked off and replaced with a complete E&C gearbox, with a couple of component swaps (nozzle/piston/piston head/spring/spring guide). Stock/Grip/Motor are all out of my spares box and are not Specna in Origin.

Everything is structurally sound - no cracks, deep scratches or stripped threads from what I can see.

The gun has been painted by me - turns out that Specna's 'Nano-bollocks' paint that they use for their receivers is nano-thin and susceptible to destroying itself in a slightly humid conditions - like being in the same room as a tumble-dryer. I had to strip back a lot of the original paint (which wasn't hard as a Sharpie leaves a thicker finish) so I used the gun to dick around with my new airbrush.

It's had a couple of coats of paint, plus some ultra-matte varnish on top, but it's not the most hard-wearing finish (there's a few little marks already) so I would recommend attacking it with some Halfords Matte Lacquer if you want to keep that 'wannabe Geartech/Negative Airsoft but nowhere near as good' paint job I've applied.

Again - all components to reassemble and produce a fully-functioning gun are here. Or don't reassemble and split the parts for something else. Up to you, I don't care. I've never liked the gun so I'll be glad to make some room getting rid of it.

Caveat Emptor/Sold as seen.