Recently put together this HPA rifle, but have decided on yet another project so this is up for grabs.

 

Has not been fielded and only had about 500 bb's through it testing in the garden and on the range at my local site, so as you can see it's in excellent condition.

 

This has the Wolverine Bolt engine fitted, not to be confused with the Bolt M. This is the one that uses a small 7.4v lipo battery in the stock (not included as I need it for my other HPA RIF).

 

List of what's included...

 

JG BAR10 G-Spec with 3-9 scope - £160

Wolverine Bolt for JG BAR10 - £315

Wolverine Bolt air saver tuning kit - £20 (currently has red spring as I was running at 120psi for 2.3j on .45g bb's)

Action Army CNC hop unit - £50

Action Army 300mm twisted outer barrel - £45

Action Army type B 14mm CCW silencer adapter - £10

Tridos TDC 2.0 Pro version - £45 (fitting kit and all spare nubs etc included)

Maple Leaf 370mm 6.02 inner barrel - £30

Maple Leaf autobot 70 degree silicon hop rubber - £10

3x Action Army 50 round magazines - £30 (plus the stock magazine)

 

 

All original parts are included and completely unused, forgot to put it in the pictures but I will included the original 300mm smooth outer barrel as well.

 

As you can imagine this rifle is insanely quiet and paired with the AA hop unit and Tridos TDC it really does have excellent range and accuracy. Heaviest weight bb's I tested was Longbow .48g and it was still able to over hop them. I have also fitted a sleeve inside the outer barrel just before the hop unit to make sure alignment between the nozzle and hop unit is perfect, it didn't need this but it's something I like to do, but it can be removed easily should you wish. There are no marks on the nozzle or hop unit showing the alignment is spot on.

 

 

Would ideally prefer collection if possible (near Walsall, West Midlands), but postage can be sorted if needed.

 

 

Asking £480, thanks for looking.