This was my first gun i picked up cheap to come back into airsoft after a few years. Its was a good gun until the front of the gearbox blew out. 
I've taken my ZCI 6.02 barrel out and other components from the gearbox such as gears, piston etc to use in other builds and also due to damage. 
To get this running you would need;
-Ares EFCS GB shell 
-Inner Barrel (Outer accepts 300mm and above)
-Hop up rubber/bucking 
-Rotary Hop up unit if you are fussy.
-Gearbox Internals (gears,piston,cylinder, piston/cylinder head.)
Reminder that these use a magnet in the sector gear for positioning.
-Motor 
-Maybe other small sundries such as the trigger spring.
I would say an estimate of around £100-£120 to get everything if you wanted to get it running.

I have seen that you can modify standard v2 gearboxes to fit inside, something to do with filing down the top of the box, I dont know. Check out the Ares Amoeba owners group on facebook.

Whats included:
Handguard, Stock, Lower and Upper Reciever
Stock Tube
EFCS Rear wired
Amoeba pro grip
Amoeba pro/metal spring guide
Other parts, such as original hop up unit (see box picture)


I just want this out of my hair, its taking space up and its never going to get rebuilt so...
£30 No offers. You can split it all yourself, or use the parts.
I would be happy to split part out anything you may need to complete a build,just prices will vary and you wont get as much of a deal etc... just send me a message and I'll reply ASAP.
I can post, but would need to see about postage fees first etc.