BigStew Posted November 27 Share Posted November 27 Picked up a VFC 417 and switched over the receiver and now the safety doesn't work. I Can't see what I have done wrong or how the safety actually engages hammer/trigger and can't find any assembly guides. The manual exploded diagram is not giving any clues. Can any one offer some advice, possible some pictures of trigger group in place? Link to comment Share on other sites More sharing options...
BigStew Posted December 11 Author Share Posted December 11 Replaced the safety because it was worn and missing one of the levers. No change. I installed it with the hammer down, but once again once I put it into safe the trigger releases the hammer, however there is no movement after the hammer is released. Please some one got any ideas what I am doing wrong before I replace every part? Link to comment Share on other sites More sharing options...
Gavthegat Posted December 11 Share Posted December 11 Unfortunately I don’t have a 417 no more otherwise could have sent you some internal pictures. I’ll look in my 416 as I assume there not too dissimilar. BigStew 1 Link to comment Share on other sites More sharing options...
BigStew Posted December 11 Author Share Posted December 11 39 minutes ago, Gavthegat said: Unfortunately I don’t have a 417 no more otherwise could have sent you some internal pictures. I’ll look in my 416 as I assume there not too dissimilar. A few of the parts are interchangeable so anything would help. Thanks. Link to comment Share on other sites More sharing options...
Gavthegat Posted December 12 Share Posted December 12 18 hours ago, BigStew said: A few of the parts are interchangeable so anything would help. Thanks. Hopefully these give you some reference. Fire selector is in a couple different positions. Fingers crossed you can spot something wrong! BigStew 1 Link to comment Share on other sites More sharing options...
BigStew Posted December 12 Author Share Posted December 12 52 minutes ago, Gavthegat said: Hopefully these give you some reference. Fire selector is in a couple different positions. Fingers crossed you can spot something wrong! A few difference but basically the same. I am not seeing anything different to the way I have reassemble mine. Oh well another try tonight. And maybe more parts ordered Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now