Qxx Posted September 1 Share Posted September 1 Hello, I have a short barreled Evo3(141mm) so to get it to reasonable fps it's gotta m120 spring and a excellent air seal. Should I be using a harder bucking due to the higher power of my system or is a 50 degree bucking fine ? Link to comment Share on other sites More sharing options...
Galvatron Posted September 1 Share Posted September 1 Without knowing what you're currently shooting at to set a baseline, nobody can say for certain if 50 degree bucking would be suitable. Are you saying you're using an M120 spring or that your Evo III has got to have such a spring? Hudson 1 Link to comment Share on other sites More sharing options...
Sewdhull Posted September 1 Share Posted September 1 (edited) If the current bucking is hopping whatever weight bb you are using, properly then it's fine. You'll be seeing similar fps at the hop as everyone else, the weight of the bb will matter more and you should have plenty of adjustability to offset the increased spin on the bb. Edited September 1 by Sewdhull Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now