Jump to content

Leeking Gas Magazine


Airsoft Dan
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Well i forgot to say first it was leaking loudly, but I opened up the magazine and put it together again and it was a bit better. It's leaking from where you fill it up with gas.

 

Thanks, Dan.

Link to comment
Share on other sites

Well i forgot to say first it was leaking loudly, but I opened up the magazine and put it together again and it was a bit better. It's leaking from where you fill it up with gas.

 

Thanks, Dan.

 

Could be an O-ring.... Try sparying Silicon inside the mag

Link to comment
Share on other sites

  • 3 weeks later...
Ok, thank-you for advice both of you.

 

Thanks, Dan.

if u dropped it may be good idea to do mainenainence on whole mag drop inlet valve output valve and all o rings in finish line cross country wet lubricant and leave overnight u can get it from halfords put sum lube around top ejection port then wipe off excess put a dab were ur replacing the valve put back together ull have a leak free mag

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...