WE mags for toucan big bird keep discharging

[Joshua williams]

Hi, any tips on how to stop my WE toucan big bird mags stop discharging after two shots? 

 

Thanks

[alex90]

sounds like the nozzle/piston needs a bit of oiling 

just take top slide off and drop a blob of oil in and moving back and forth with your finger should do the trick  

[Joshua williams]

Thanks for the help

[Joshua williams]

Hi again, tried your advice but the mags are still discharging. Started using WE nurpol black gas and am keeping Abby well maintenance gas in the mags but they're still discharging. Any further tips?

[alex90]

describe what's happening is it venting after one of two shoots or straight away when u put gas in the mag

sounds silly but are u filling the mag up with the bottle of gas upside down

if you can a video is always good  

[Joshua williams]

The mags vent after 3 or 4 shots (they get really cold really quickly if that helps). I'm filling them up with the bottles upside down as well, I'll have a look on YouTube as well.

[alex90]

does the top slide get stuck in a particular places like does it stay to the rear or does it get stuck just be fore it fully forward and does it do it every time in the same place or is it different position when venting

as sounds like some thing is not lubed properly or the hop up rubber has swollen and nozzle cant reset properly but that would be after shot on not 3/4

[alex90]

can u send pics of the frame rails like wear the top slide seats in from few angles  

[Joshua williams]

The top slide doesn't get caught just doesn't cycle all the way back. I'll get hose photos as soon as I can.

[alex90]

sounds like the nozzle/piston to me then

[Joshua williams]

Ok, thanks for the help