weldersbench Posted February 27, 2017 Share Posted February 27, 2017 Hi, Just wondering if anyone's seen this before and knows a fix? When I cock the gun the hammer does what it's supposed to but when firing it doesn't knock the hammer all the way down and the slide gets stuck on it and it spew the gas out of the mag, that or it doesn't engage the hammer fully, any ideas what would cause this? Cheers! Link to comment Share on other sites More sharing options...
alex90 Posted March 1, 2017 Share Posted March 1, 2017 so when you pull the slide back by hand it cycles fine but when you fire with gas it slide back half way and jams? if so sounds like a dry nozzle/piston head when was it last oil/greased up Link to comment Share on other sites More sharing options...
weldersbench Posted March 6, 2017 Author Share Posted March 6, 2017 I was running maintenance on it when I found the issue, after disassembling and lubing it all it seemed to cycle fine, yet when i took it to a skirmish it still jams and vents the gas from the mag when trying to fire bbs Do i need to lube the blowback housing nozzle too? Link to comment Share on other sites More sharing options...
alex90 Posted March 7, 2017 Share Posted March 7, 2017 yeah you want a small amount of grease/oil in the nozzle chamber or on the piston head as running them dry they don't move freely and jam is the gas the same as before and after the issue make sure clean the barrel after a few test mags as any excuses oil guna get shot down it Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.