Jump to content

Need help with the CZ-P09 piston block!


Hamolicious
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

It's pretty much a piston, which sits in the cylinder, it has rails on both sides to guide the cylinder back and forward when firing.

There is no big need to know every single part as you probably wont really need it, as it is not a real gun which you have to strip fully and clean every time you shoot it.

Note (the diagram/picture is a little bit different to the actual internals (well at least some bits are)

If you really want to learn more about it, the best option to do is to disassemble one yourself, and so you can look on parts from different angles and understand how they work. I will recommend you not to open/disassemble the trigger mechanism as there is a lot of small parts and springs that like to fly off, and it is also hard to put back without knowledge.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...