The_Prussian98 Posted November 23, 2016 Share Posted November 23, 2016 So a few months back I purchased a new barrel for my 416 and some new hop up rubbers, they were not the right ones (barrel too short and didn't have second incision to fit in hop-up unit, rubber too short) so I put it back together with the stock parts and refitted it, however now whenever I fire one of three things happen: 1. It double feeds. 2. The pellet does not go into the barrel and jams. 3. It fires, but the round has visibly less fps than usual. Any idea how to fix this, as I want to use it or sell it on, and also if I get it fixed I would want to upgrade it and make it an overall better rifle. Link to comment Share on other sites More sharing options...
karl_liverpool Posted November 23, 2016 Share Posted November 23, 2016 My guess would be on the bucking either being worn or seated wrongly. Link to comment Share on other sites More sharing options...
The_Prussian98 Posted November 26, 2016 Author Share Posted November 26, 2016 My guess would be on the bucking either being worn or seated wrongly. okay, I'll give that a try, its a little old as I got it second hand, kinda tempted to replace most the internals anyways Link to comment Share on other sites More sharing options...
The_Prussian98 Posted December 7, 2016 Author Share Posted December 7, 2016 My guess would be on the bucking either being worn or seated wrongly. okay, I'll give that a try, its a little old as I got it second hand, kinda tempted to replace most the internals anyways so I bought a replacement hop-unit, maple leaf bucking and barrel and tried all of them in various combinations with the stock parts and it still double feeds and thus does not work, however the bb will go down the barrel if dropped into the hop-up unit, is it the piston? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.