Spammy Posted August 19, 2016 Share Posted August 19, 2016 Hello guys and girls Well Iv acquired a second hand pistol not 100% sure of make and model, what's happening is the gun will fire about 2 BB fine then it won't fire any then it will fire 2 BB and then maybe vent it's gas out the mag, it don't always do it in that order, but any ideas of why it could be doing this would be great, I plan to stripe the gun Down shortly thank you Link to comment Share on other sites More sharing options...
Supporters Monty Posted August 19, 2016 Supporters Share Posted August 19, 2016 Give it a thorough clean, should sort it out. Clean everything in the slide and receiver that you can without taking the entire thing apart, then add a little bit of teflon grease on the rail where the slide sits, hammer assembly and trigger unit, silicone grease on the o-rings and keep the mags filled with gas when in storage. Keep the barrel and hop up unit free of any grease. (copied from here http://www.airsoft-forums.co.uk/index.php/topic/32272-how-to-properly-clean-gbb-pistol/) Link to comment Share on other sites More sharing options...
Spammy Posted August 19, 2016 Author Share Posted August 19, 2016 Thank you for the advice I will do it now Link to comment Share on other sites More sharing options...
Spammy Posted August 19, 2016 Author Share Posted August 19, 2016 Well just took the hop up apart and oil oozed out Link to comment Share on other sites More sharing options...
Spammy Posted August 19, 2016 Author Share Posted August 19, 2016 So just a update striped down, I mean a really good clean and stripped down to the last pin, put back together and fire beautifully now Thank you Monty for the advice Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.