gezer Posted January 31, 2014 Share Posted January 31, 2014 Hi guys, I was thinking of building up a new m4. And I've decided to give it a go. I will sell a few things and should get around £500 to spend in all I want to achieve around 26-30rps with either 7.4v or 11.1v (not sure) So here's what I was thinking Internals BTC spectre/chimera Prowin split mechbox (with the hop built in) Siegtek 14:1 ratio Terminusx bushings Lonex a2 Titan motor (siegetek pinion) Shims of some brand (is there any difference between brands) Lonex blue/red piston (not sure) Not really sure on cylinder, cylinder head, piston head, spring guide or spring (I now it'll be roughly m90-100) R hop and m nub Prommy barrel Externals G&p body with crane stock Madbull ris Magpull trigger guard and grip Pmags What changes would you do to this set up? And advice on the things I'm not sure on would be great Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted January 31, 2014 Supporters Share Posted January 31, 2014 save yourself a load of time and hassle with internals and just buy a Marui CRW High Cycle, stick a 7.4v LiPo in it and you've got your ROF sorted. They're pretty economical too! Link to comment Share on other sites More sharing options...
jay83 Posted January 31, 2014 Share Posted January 31, 2014 Cant go wrong with a TM high cycle mate Link to comment Share on other sites More sharing options...
sunstar Posted February 3, 2014 Share Posted February 3, 2014 Also get a mosfet! when using lipo 11.1 then you will have burns on the triggers !!! So get a mosfet af priority one! Don't have to be a fancy programable one, a simple mosfet swithc can do the job just fine :-) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.