Silentassasin Posted January 5, 2014 Share Posted January 5, 2014 Hello guys. I have an old ics m4 which I am starting to customise its has a 2 piece gearbox. Is there any other gearbox which will drop in? The selectorplate on mone has snapped and its screachs quite bad during normal use. Im planning an upgrade on all areas of the gun so maybe a performance gearbox if there are any out there? Thanks joe. Link to comment Share on other sites More sharing options...
Mack Posted January 5, 2014 Share Posted January 5, 2014 Nope, ICS Bodies will only accept the Split gearbox by ICS. Link to comment Share on other sites More sharing options...
Silentassasin Posted January 6, 2014 Author Share Posted January 6, 2014 Ok thankyou! Link to comment Share on other sites More sharing options...
Silentassasin Posted January 6, 2014 Author Share Posted January 6, 2014 Which version gearbox are they based on? Ad I need a new selector plate. I will grease and shim inside to try and stop the squeal! Link to comment Share on other sites More sharing options...
Unrustle_Thine_Jimmies Posted January 6, 2014 Share Posted January 6, 2014 Most of the ICS split V2s parts are compatible with the Marui V2,with some parts like the shell(Obviously) and the anti reversal latch are proprietary. I believe everything else is standard marui stuff. Make sure when taking it apart to hit the forward assist to release spring tension or else some parts may break. The squeal may also be from poor motor height,use the screw on your pistol grip to lower and raise the motor and fire off a few rounds each adjustment. The less squeal,the better. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.