WE m4 aeg hop up problem!

[Adammd209]

Hi,

 

Has anyone experienced problems with m4 hop units? In the way that when I try and set the hop correctly in order to make the bb fly straighter, the bb tends to more or less drop out of the end of the gun!

 

Does it need time to bed in? Only put about 300-400 rounds through it so far.

 

It's ok when I wind the hop off but like I say, the range isn't great. Also when I put it through the chrono, it was achieving about 250-260 fps with .20 bb's which doesn't sound too great!

 

Cheers

 

Adamd209

[Mike636]

Is it the stock WE clear plastic hop up?

[Adammd209]

Yes

[Mike636]

I had one and they are toss to be honest, I installed a Prowin CNC hop up chamber and it added around 50 FPS so the airseal on my old hop up must of been terrible. http://m.ebay.com/itm/181124160080

[Adammd209]

Will it fit straight onto the WE?

[Mike636]

It took about 20 minutes of gentle sanding with my Katana I'll take a picture when I'm home.

[Adammd209]

Awesome!

[Wojtas]

Hi,

 

I bought prowin hop up chamber and I have a problem to fit it in my WE Katana Raptor. Thanks for any suggestions how to adjust (sanding) the chamber.

 

Wojtek

[Mike636]

I'll take a few pictures tomorrow for you but it's mainly the front block -

[Wojtas]

Thank you very much. I'm newbie and I do not want to damage the chamber. Your pictures will be very helpful!

[Mike636]

 

You dont need to take too much off, just a little at a time. Get it chrono'd when your done mine gained about 50fps

[Wojtas]

Thank you very much! Tomorrow I get down to work... I hope I can get a similar increase. I'll let you know how it goes