Jump to content

Classic Army SPC to sliding stock


paulus
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Posted

I've recently started airsofting again and have just disassembled my 9 year old Classic Army M15 SPC, as a result am replacing a fair amount of the gearbox parts.

 

While doing this I am keen to replace the solid stock with a sliding stock, I don't need a massive battery and would prefer the gun to be a bit shorter. My only concern is;

 

  • Once disassembled I am a bit concerned that the lower half of the body may not be compatible with a screw in stock pipe (I may have the wrong end of the stick here) as there is a protruding metal piece (see image below)

SL-M15A4-upperlower1.jpg

  • I am also struggling to find a UK retailer that sells a crane stock, battery and stock pipe. I have seen a number on ebay but don't really want to buy a cheap and nasty stock for an otherwise nice rifle.

 

Any responses appreciated!

Posted

Don't worry. Nearly all M4/M16 AEG rifles have that protruding part on the receiver.

 

The stock tube slides over this with a fake nut already attached. The Stock tube screws into the back of the gearbox in a similar way to the full sized stock.

 

Thanks

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...