Carrel Posted August 21, 2013 Share Posted August 21, 2013 Pretty obvious topic here as to what I'm going to talk about. I've found a place to buy an BO AKM 13 http://www.bomanufacture.com/bibliotheque/photos-produits/ar10100-BD.jpg Now since I'll be paying sooo much for this I really want top quality. Now these externals have to be the best for any AK on the airsoft market. So I want top grade internals to match. I know people will say that this AK I will be buying is already highly upgraded. Well I've heard that they don't last long and there's a lot of wear and tear on the internals. So, rather than figure out the problem and change them I've thought if the base internals wear and tear lets just strip it out and start over (something else will eventually go). So, I need suggestions for a good base gearbox to start with, (I'd like a ver.3). Had a bit of a look around but can only find people taking them apart and not reviewing them so I don't know what to go for. Then there's the hop unit, Again I would like top notch stuff but I do want to somehow get a MOFSET in some way. I don't want to have to throw a nasty looking silencer on the end of the beautiful looking externals. I've seen a mag which has a tracer inside by G+P I think. The only external upgrade I will doing is maybe a top rail for the AK for optics + contour camera. Essentially what I want is an incredibly reliable and accurate with long effective range DMR type AK. But I still want that decent ROF for when I need it. Cheers guys Link to comment Share on other sites More sharing options...
Unrustle_Thine_Jimmies Posted August 21, 2013 Share Posted August 21, 2013 Where did you get reports of these breaking? according to a few forums(RA,reddit etc..) they are invincible gearbox wise,with full lonex and other high end internals and LCT externals with hand made wood furniture from france. There's no point in upgrading anything in this gun. Wiring a simple mosfet is a good idea if you want to preserve contacts or use a Life or Lipo,if it does not come with one already. I heard that it's just as good as RealSword T56s And TM recoil Schocks performance wise. If you want your AK with DMR FPS then you cannot have full auto. If you want a russian DMR check out the RealSword Dragunov,probably the best,of not only sniper rifle ready to go out the box. Link to comment Share on other sites More sharing options...
Carrel Posted August 21, 2013 Author Share Posted August 21, 2013 I know someone who is a very skilled airsoft technician and that he says they've had problems. I trust him a bit more than the RA and reddit forums ect. I'd like to know some possible high quality upgrades anyway just in case. I will give the stock internals a go though. I want it at DMR levels of accuracy but under 328FPS so I can still use the full auto. The miracle barrel will help with that level of accuracy as well. The BO AKM 13 will be the AK I choose though Link to comment Share on other sites More sharing options...
Unrustle_Thine_Jimmies Posted August 21, 2013 Share Posted August 21, 2013 The miracle barrel turned out to be pants. Got universally panned in Asia,one guy on ASSF owns a store and ordered in a bach,then they were compared to G&g barrels Both with stock hop units and performed worse. BO AKM 13 seems to do what you want out of the box. What were the part failiures on it anyway? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.