Jump to content

CM.041 feeding issues


TacMaster
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I'm starting to get feeding issues where the BBs will stop coming out of my barrel after a 4-6 round burst. When I take the mag out 4 or 5 BBs will fall out, is this a dodgy mag or bad hop rubber?

Link to comment
Share on other sites

Have you tried a different mag? If so, does it still do it? Hicaps can get a broken spring and some midcaps can bind in the feed tube. If it's just the one mag then it's worth stripping it down, cleaning it and putting a bit of silicon on the feed tube. If it's all mags then more likely a hop problem, either too much hop or possibly a knackered rubber.

Link to comment
Share on other sites

The issue where 4-5 BB's are falling out is normal, there is a tube which the BB's are pushed up towards the hop unit, when the mag is empty there is no pressure on the BB's in the tube, meaning they fall out.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...