dazzer306 Posted April 25, 2012 Share Posted April 25, 2012 Hi all I have an src g36 kv and want to remove the outer barrel to put a silencer on it like the kv tactical. After taking hand guard off I can't seem to remove the outer part I see where it joinsnear body but just don't know how to remove it and dont want to break anything any help would be great. I've looked on web but came up with zip Link to comment Share on other sites More sharing options...
Boro Posted April 25, 2012 Share Posted April 25, 2012 Doesnt the silencer fit where the flash hider sits? If so, theres a grub screw in the side of the flash hider, unscrew it a little and turn the flash hider to unscrew. If you do need to take out the whole outer barrel. You need to take out three screws just near the handguard you have removed and it should pull out. Link to comment Share on other sites More sharing options...
dazzer306 Posted April 26, 2012 Author Share Posted April 26, 2012 No not the flash that comes off ok, it's the outer barrel thats the problem as I want to add a silencer to end where it comes off, I'll give that a try thanks for that this is what I'm looking to do but as a kv http://ep.yimg.com/ca/I/yhst-49666507782127_2207_22723231 if picture not there (not too sure how to add pic) here's link http://www.airsoftstation.com/jg-mk36-ris-...e-silencer.html All ok now sorted it out the outer barel was screwed on took a bit to undo as it had what looked like some sort of thread lock just need to buy a nice long silencer now Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.