Where to find CYMA spare parts???

[ronin677]

Hi guys,

I need to find a replacement bolt, spacer and sprung knob for my CYMA AK74. Any ideas where I can find these parts? See photos.

Bolt & spacer



Sprung knob in stock



Area missing parts



cheers

Jon

 

[Lozart]

Rsov.com

 

[Sitting Duck]

Got cheapo crap like that

That "might" do the job.....

Folding AK stock bits n bobs that could fit

Didn't chime in earlier coz thought you was after bespoke m14 hop or something

But 74 stuff might be able to use /help

 

[ronin677]

Got cheapo crap like that

That "might" do the job.....

Folding AK stock bits n bobs that could fit

Didn't chime in earlier coz thought you was after bespoke m14 hop or something

But 74 stuff might be able to use /help

You got the bits that might do the job? Would be mighty appreciative if you had

 

[Sitting Duck]

Sitting Duck's used (knackered)

Used AEG's & breakers yard:

 

[AK47frizzle]

You might find some at airsoft-club.com, they sell s wide variety of spare parts for nearly everything

 

[ronin677]

Sitting Duck's used (knackered)

Used AEG's & breakers yard:

How much for those bits?

 

[Sitting Duck]

2 bolts, 2 brass sleeves + 2 sprung lugs/bullets

oooh dunno special order them mofo's

£3 posted ??? - can just chuck 'em in a jiffy bag

It came off the AKFrizzle 901c crappy double eagle krinkov bollox

but them bits and the folding stock should be compatible

(99% reckon it is probably made by Cyma or JG I would of thought)

if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway

£6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars

it should work with just screws/sleeves/lugs etc.....

you shouldn't need any of the 901c stock itself really

worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok

 

[Raffles]

CYMA stuff seems to either be welded solid with threadlock from the factory or have none at all and go flying into the undergrowth never to be seen again.

I got an M14 from CYMA and some bright spark had threadlocked the hop adjustment wheel!

A £3 investment in decent threadlock is far better than forking out a load for replacement parts, if you can find them.

 

[ronin677]

2 bolts, 2 brass sleeves + 2 sprung lugs/bullets

oooh dunno special order them mofo's

£3 posted ??? - can just chuck 'em in a jiffy bag

It came off the AKFrizzle 901c crappy double eagle krinkov bollox

but them bits and the folding stock should be compatible

(99% reckon it is probably made by Cyma or JG I would of thought)

if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway

£6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars

it should work with just screws/sleeves/lugs etc.....

you shouldn't need any of the 901c stock itself really

worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok

Send me your Paypal addy and I'll send you the £6

 

[ronin677]

All sorted - thanks Sitting Duck