Where to find CYMA spare parts???
- Thread starter ronin677
- Start date
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
Got cheapo crap like that
That "might" do the job.....
Folding AK stock bits n bobs that could fit
Didn't chime in earlier coz thought you was after bespoke m14 hop or something
But 74 stuff might be able to use /help
That "might" do the job.....
Folding AK stock bits n bobs that could fit
Didn't chime in earlier coz thought you was after bespoke m14 hop or something
But 74 stuff might be able to use /help
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
Sitting Duck's used (knackered)
Used AEG's & breakers yard:
Used AEG's & breakers yard:
AK47frizzle
Members
- Apr 5, 2013
- 1,453
- 468
You might find some at airsoft-club.com, they sell s wide variety of spare parts for nearly everything
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
2 bolts, 2 brass sleeves + 2 sprung lugs/bullets
oooh dunno special order them mofo's
£3 posted ??? - can just chuck 'em in a jiffy bag
It came off the AKFrizzle 901c crappy double eagle krinkov bollox
but them bits and the folding stock should be compatible
(99% reckon it is probably made by Cyma or JG I would of thought)
if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway
£6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars
it should work with just screws/sleeves/lugs etc.....
you shouldn't need any of the 901c stock itself really
worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok
oooh dunno special order them mofo's
£3 posted ??? - can just chuck 'em in a jiffy bag
It came off the AKFrizzle 901c crappy double eagle krinkov bollox
but them bits and the folding stock should be compatible
(99% reckon it is probably made by Cyma or JG I would of thought)
if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway
£6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars
it should work with just screws/sleeves/lugs etc.....
you shouldn't need any of the 901c stock itself really
worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok
Raffles
Members
- Aug 1, 2015
- 21
- 14
CYMA stuff seems to either be welded solid with threadlock from the factory or have none at all and go flying into the undergrowth never to be seen again.
I got an M14 from CYMA and some bright spark had threadlocked the hop adjustment wheel!
A £3 investment in decent threadlock is far better than forking out a load for replacement parts, if you can find them.
I got an M14 from CYMA and some bright spark had threadlocked the hop adjustment wheel!
A £3 investment in decent threadlock is far better than forking out a load for replacement parts, if you can find them.
Similar threads
