What is this item?

[samsimsom]

Hello,

Iam very sorry, i am not a airsofter but i am a character designer and i started a new 3D model. But im stuck some items name for referace.

i added attacment and marked red and blue line. i dont know whats puspuse and item names, thank you for your help

View attachment 43003

 

[L3wisD]

That just looks like the hydration tube going from the camelback.

It's been threaded through the straps of the soldier's plate carrier (vest) by the look of it.

He's got a different gun in each picture, but the one circled in blue could just be any CQB (Short) M4, the butt stock style on that gun is called a "Tanker stock"

 

[proffrink]

Fyi, a Camelbak is a brand name of hydration pouch. Basically it's just a water bottle but it sits flat. It's one of these:

View attachment 43004

 

[clumpyedge]

Hello,

Iam very sorry, i am not a airsofter but i am a character designer and i started a new 3D model. But im stuck some items name for referace.

i added attacment and marked red and blue line. i dont know whats puspuse and item names, thank you for your help

View attachment 43003

Gun circled in blue looks to be a 416c

 

[samsimsom]

Thank you very much, this information will be very useful to me

 

[L3wisD]

Thank you very much, this information will be very useful to me

No problem.

If you ever need high-res or close up shots of certain guns or bits of kit, I'm sure everyone here would be happy to share some clear photos for you to use as reference etc.

 

[samsimsom]

I'm so glad to hear that.
I wanted to share the model I've done so far. This is only starting base sculpt. I want to produce a realistic model.

View attachment 43005

View attachment 43006

View attachment 43007

 

[Lozart]

Initial observation - the three magazine pouches at the front of the vest are too long and the top is too close to the admin pouch on the chest.

 

[EvilMonkee]

Also, are you modelling a 'real' SF soldier or an airsofter.  A real soldier would have no need for lower face protection other than to hide their identity in which case some form of snood/balaclava would probably be worn.  Looks currently like your model has rigid mesh face protection on.

 

[samsimsom]

Thank you so much for observations and proposal. @Lozart and @EvilMonkee
i want to modelling airsofter. I am in the decision phase in this model. at this stage, a lot of things will change and reposition on the character.

I'm thinking about taking your suggestions and making changes. 

 

[Lozart]

Thank you so much for observations and proposal. @Lozart and @EvilMonkee
i want to modelling airsofter. I am in the decision phase in this model. at this stage, a lot of things will change and reposition on the character.

I'm thinking about taking your suggestions and making changes. 

Worth having a look at some of the Ghost Recon 3d models for spacing and layout  https://www.google.com/search?rlz=1C1GCEU_enGB820GB820&biw=1920&bih=945&tbm=isch&sa=1&ei=Scd3XNrvAeO61fAPnMmB8As&q=ghost+recon+3d+model&oq=ghost+recon+3d+model&gs_l=img.3...16814.17811..18010...0.0..0.49.93.2......1....1..gws-wiz-img.IpLcTHAphCA#imgrc=_

 

[clumpyedge]

Also, are you modelling a 'real' SF soldier or an airsofter.  A real soldier would have no need for lower face protection other than to hide their identity in which case some form of snood/balaclava would probably be worn.  Looks currently like your model has rigid mesh face protection on.

FYI  UKSF have used mesh lowers for a while and not just for hiding identities or so I'm led to believe.

 

[SgtTalbert]

FYI  UKSF have used mesh lowers for a while and not just for hiding identities or so I'm led to believe.

Wasn't that due to using Simunition rounds?

 

[clumpyedge]

Wasn't that due to using Simunition rounds?

No they were seen using them on the ground in the Manchester raids and a few other places, I've asked a friend if he has details on why they would use them over snoods so I'll wait to see what he says. I might be wrong but I'm pretty sure there is a reason they were using them over snoods.

 

[SgtTalbert]

No they were seen using them on the ground in the Manchester raids and a few other places, I've asked a friend if he has details on why they would use them over snoods so I'll wait to see what he says. I might be wrong but I'm pretty sure there is a reason they were using them over snoods.

Potential protection 'debris' or 'richochets' or maybe, just maybe, they were actual airsofters...

 

[clumpyedge]

Potential protection 'debris' or 'richochets' or maybe, just maybe, they were actual airsofters...

From what I have read its for debris protection like you say.

 

[SgtTalbert]

From what I have read its for debris protection like you say.

Excellent, mesh masks are now a valid look at Milsims...lol

 

[clumpyedge]

Excellent, mesh masks are now a valid look at Milsims...lol

Ive not known places to stop you using plain ones but having said that I wouldn't be surprised if you rocked up wearing one with a joker smile or some shit on it.

 

[SgtTalbert]

Ive not known places to stop you using plain ones but having said that I wouldn't be surprised if you rocked up wearing one with a joker smile or some shit on it.

Oh no, I've not been to an event where you're not allowed BUT most 'milsimers' say it 'takes away' from the realism.

I myself normally wear a snood with small mesh underneath

 

[clumpyedge]

Oh no, I've not been to an event where you're not allowed BUT most 'milsimers' say it 'takes away' from the realism.

I myself normally wear a snood with small mesh underneath

Same mate, just an FYI seems we are both right on the lower face pro assumption as to why they use it. both persec/simunition and a mixture of other things!

Good to learn something new