What have you made?

[Jez_Armstrong]

Have you tried this out in the field yet?

Still working on it, had to fit pass filters and I'm looking for a decent sized tin to put the RX radio in 

 

[Egon_247]

What have i made? Well yesterday i made a mess of my chrono by trying to test the output of my trishot. Which didnt end well. 

I think i may be in the market for a new chrono......    

 

[DanBow]

Need a couple of barrel socks so got my sewing machine out. Mine is just a plain camo thing but did something nicer for my daughter.

View attachment 131823

 

[Shamal]

Need a couple of barrel socks so got my sewing machine out. Mine is just a plain camo thing but did something nicer for my daughter.

View attachment 131823

Niiice!!

Can you run me up a dress for me proms night ???

 

[Tackle]

Niiice!!

Can you run me up a dress for me proms night ???

Lol, not with your legs,  remember how you looked last time?

View attachment 131830

 

[Shamal]

Lol, not with your legs,  remember how you looked last time?

View attachment 131830

Shit!

I thought you destroyed that one ??

 

[GenuineGerman]

On a positive note the positive stop fits, could be 0.5mm small but they do the job. Although I have made more than I will need now.

View attachment 131986

 

[Rory]

Found an old ASG tri shot in a bag under some stuff in the garage. Was never a fan of the pistol grip, so took it off and decided to make a stock that suits my “larger than usual “ chip shovels (hands, for those struggling).

MDF core, then built around it with foam pipe cladding and paper maiche to make the skeleton.  Got some wooden packers on the pistol grip, and waiting on some tape and resin to finish it off. Will post a finished pic soon

View attachment 132518

View attachment 132520

View attachment 132521

View attachment 132522

 

[Rogerborg]

Got some wooden packers on the pistol grip, and waiting on some tape and resin to finish it off

OK, I'm intrigued by what the finished plan is.  Purely functional, or aesthetic?

 

[Rory]

Functionality, also a degree of boredom. 
I previously had the Franchi SAS and didn’t like the fit of the pistol grip and stock. I replaced that with an m870 which was comfier for me. 
The principle for this bodge is that I’ll have the longer curved handle (similar to older shotguns) and the stock length tucks into the crook of my elbow for swift cocking. Which so far when I’ve been manhandling it, is comfortable. Still a bit to do, I’ll let you know if it’s a tremendous success or a complete disaster 

 

[Rory]

Got a bit fed up waiting for the resin delivery and used some cam tape. Will remove and finish all black eventually.

Hopefully the longer curved pistol grip allows smoother cocking and takes the jerking motion off my wrist, need that for… “other things”….View attachment 133093

View attachment 133092

 

[MorganL]

The amount of stuff I've made now is quite long, currently working on a more effective target box the amazon box stuff with rag is getting a little beat up lol. 

Sheet contsruction with a replacable A4 target sheet at the front, angle back should deflect any bbs that make it through PVC curtain strips i'll afix to the top plate and foam in the bottom tray should work, I'll let everyone know how it goes . 

View attachment 133134

 

[The_Lord_Poncho]

The amount of stuff I've made now is quite long, currently working on a more effective target box the amazon box stuff with rag is getting a little beat up lol. 

Sheet contsruction with a replacable A4 target sheet at the front, angle back should deflect any bbs that make it through PVC curtain strips i'll afix to the top plate and foam in the bottom tray should work, I'll let everyone know how it goes . 

Looks really good - I've long been planning to make something similar. Is yours to be made from sheet metal? Mine is more likely to be an MDF creation.

 

[MorganL]

Looks really good - I've long been planning to make something similar. Is yours to be made from sheet metal? Mine is more likely to be an MDF creation.

Yeah all sheet metal, riveted except for one side which will be bolted for access, I've got a laser cutter so easier to do things out of metal , MDF would probably help to be less noisy if any hit the sides though. 

 

[HuttArmouries]

Finally started work on the box mag for the hk21. Has internals from an ares lmg box which will be wired to a pressure switch. Hpa adaptor goes in through the back as ive drilled and tapped a hole in the back of the mag. 

View attachment 133261

View attachment 133263

 

[MorganL]

Quick make for today, custom glock foam for a nuptial case. 
 

View attachment 133475

 

[gavinkempsell]

Tidy job.

 

[MorganL]

So have just made myself a custom Pelican 1510 loadout to take with me as my MWS brakes down pretty easy and the gun box I bought was way too big for taking on a train. 

View attachment 133915

View attachment 133916

Wondering if anyone else would be interested in something like this can accomidate other boxes I just had a spare 1510 laying around un used. 

 

[gavinkempsell]

Nicely done.

 

[SSPKali]

Playing about mounting my Kywi pouches with 1” velcro one-wrap and with some off cut paracord made this quick access TQ* mount. Pull down on the red handle and it is instantly accessible. 

Probably 1001 things you can do with one-wrap, need to order a big roll as so handy for strap / cable management.

*don’t buy knock off TQs unelss you clearly mark them FAKE. If you carry a real one get some basic first aid training (hint: very little of it involves tourniquets!)

View attachment 134934