• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

What have you made?

MiK said:
@mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy :)
Click to expand...
OR go old school and use a fold over piece of 100mph sticky tape ? ?

remember children K.I.S.S. ?

 
Speedbird_666 said:
Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is).

Battery box needs refinement - I forgot to radius the edges.

Mk II will be on the printer later today.
Click to expand...


Given the big ol' difference between quality ballistic rated goggles and the same goggles but with a fan, I think there's a huge need for simple ready-made kits (or at least the plans/links grouped together online) based on some common and popular goggle types in order for people do to these mods themselves.

 
Adolf Hamster said:
and you were doing so well too.....
Click to expand...
View attachment 75951

Ive got some 130rd mid caps for when I can get a Tanuki Works HPA adaptor, until then, changing the mag and line was too much of a pain in the middle of a game to put up with. 
 

I’ll need to see if the mechanism in the drum is capable of pushing up 0.43’s or it’s a bit of a pointless endeavour

 
Ran 400 or so 0.28’s through it this morning. Dialled in the regulator but then found it’s creeping a bit when I go up to 0.43’s so ended up having to set the regulator again… 
 

I’m very happy that it feeds the 0.43’s fine and I’m getting a consistent 299-305fps @95ish psi. Only slight issue is it looks a little daft but with 2500rd capacity, zero feeding issues and a consistent output I can live with that! 
 

Im going to tidy up the JB Weld once it’s completely cured and then probably go over it with some black paint.

View attachment 75954

 
Last edited by a moderator:
A now fully functional (but not yet pretty) front loading 12 gram co2 cartridge powered tag launcher with adjustable regulator. A nice casing is in the works. Did have to ditch the idea of a trigger mech and use a button for now but the final version should hopefully have something nicer. 

View attachment 76056

 
Modern British plumbing at its finest.?

Tell me,does your name begin with Frank and end in stien? Lol

Looks the biz though?

Regards 

 
@SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?.

 
Tackle said:
@SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?.
Click to expand...


Very rare. You can buy them all but Ive seen maybe a handful myself. And I go to a lot of multi-hundred player MilSims and the like all over the country. 

 
You must log in or register to reply here.

Similar threads

A
Calling all that have a 3D printer, MOSQUITO Open Beta test!
Replies
12
Views
5K
Speedbird_666
Speedbird_666
sp00n
What have you just 3d printed (for airsoft)
22 23 24
Replies
471
Views
86K
MrTea
MrTea
Hef Legend
Snipermechanics SRS Guide
Replies
0
Views
7K
Hef Legend
Hef Legend
jeremythegenius
Mil-Tec Ghillie suit review
Replies
5
Views
5K
Happy
Happy
Back
Top