What have you just 3d printed (for airsoft)

[Tackle]

Thanks for reminding me I need to finish my one!

How you getting on? i am considering using Alu tubing for barrel and magazine.  

Are you both going for a working multiple shell grenade launcher (like the real thing) or a single shot mock-up ?

 

[BigStew]

Are you both going for a working multiple shell grenade launcher (like the real thing) or a single shot mock-up ?

STLs i bought are for a fully functional pump action. 

 

[mightyjebus]

How you getting on? i am considering using Alu tubing for barrel and magazine.  

I need to shape the magazine spring and get the internals working and if that goes well I might start to replace parts with metal bits.

View attachment 155553

 

[Galvatron]

[Redacted]

 

[Lyndication]

I need to shape the magazine spring and get the internals working and if that goes well I might start to replace parts with metal bits.

View attachment 155553

Oh fuck yes please do keep us posted on this.

 

[Tackle]

I need to shape the magazine spring and get the internals working and if that goes well I might start to replace parts with metal bits.

View attachment 155553

Excuse my ignorance if im wrong, I haven't used 40mm gas shells for probably 20 years, but back then I remember they were quite temperamental, & prone to go off if not handled with "kid gloves", has that design issue improved enough to handle being racked in a pump system ?

 

[Lyndication]

Yeah they're pretty robust now. They have a latching valve in most models that needs a bit of force to trigger.

 

[Tackle]

Yeah they're pretty robust now. They have a latching valve in most models that needs a bit of force to trigger.

Thats good, this was like me when loading mine

View attachment 155573

 

[PopRocket123]

A piggy back mount for an Aimpoint Acro P2 for my SPR build. It's just a smidge too low as the elevation turret marginally blocks the view window but it's still usable

View attachment 155606

View attachment 155607

 

[hitmanNo2]

Has anyone tackled this project?  I was wondering if anyone has done one and not used the S&T M203 as it seems they're discontinued. 

https://cults3d.com/en/3d-model/game/gm-94-for-airsoft-s-t-m203-conversion-kit

 

[BigAl]

I’ve seen Printed M Lok forends for MP5’s but has anyone considered making fatter one for an MP5SD?  Would also like to see them for HK G36, G36K and G36C.

 

[MrTea]

Printed some molle pyro strikers rather than repeatedly making velcro ones.



Finally finished printing all the parts for the Mosquito build including a slightly different selector plate for the Cyma Platinum gearbox. Despite what the documentation for the mosquito says you can fit a 11.1v triple nunchuck battery in the long suppressor around the inner barrel. Only issue i've had so far is one side of the receiver hasn't printed the external text properly but it is what it is.