Dan Robinson
Members
- Feb 13, 2022
- 1,140
- 1,454
Is it worth using .25s? Surely .2s would be more wallet friendly?
-
2FA temporarily disabled, emails not working
Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.
Wellpro WE-23S Minigun
- Thread starter Skara
- Start date
Skara
Members
- Oct 20, 2017
- 3,302
- 1,338
- Thread starter
- #22
Whether it's worth the money or not is completely up to one's expectations.
To me it's worth it because I know I can turn it into a decent shooter and I'm not too fussed about looks.
It does stand out from the sea of M4s, if that's your thing and it has a certain "fear factor" when your target is quite close.
Keep in mind that for a similar expense you can get a generic M4 to fire at the same ROF, if not higher, and not have to worry too much about breaking things (and you get decent ergonomics on top of that)
Wouldn't run it on 0.2s because they just lack the performance, especially since this thing comes out at 0.7-ish joules and as of now there are no spare parts available.
Last edited by a moderator:
Mounted version as well now
https://www.taiwangun.com/machine-gun-aeg/we23-h-rotary-minigun-style-replica-well
https://www.taiwangun.com/machine-gun-aeg/we23-h-rotary-minigun-style-replica-well
Skara
Members
- Oct 20, 2017
- 3,302
- 1,338
- Thread starter
- #24
Yup, WellPro pumped out a few versions, some with increased mag capacity (from 1200 to 2800 rounds), longer barrels, different grips and in one photo there seems to be a retractable stock.
Since we're here:
I ordered some slightly wider o-rings (16.5mm ID x 2mm thickness against the stock 16x2 ones)to attempt to fix the air seal.
I'm now looking at hop rubbers, usually I'd go with maple leaf but a) there's 5 and b) I only run 0.25s in this so ML is overkill, I don't need mega accuracy but I would like a few more metres of range to be on par with a half decent non r-hopped AEG.
suggestions?
Since we're here:
I ordered some slightly wider o-rings (16.5mm ID x 2mm thickness against the stock 16x2 ones)to attempt to fix the air seal.
I'm now looking at hop rubbers, usually I'd go with maple leaf but a) there's 5 and b) I only run 0.25s in this so ML is overkill, I don't need mega accuracy but I would like a few more metres of range to be on par with a half decent non r-hopped AEG.
suggestions?
