WE L85 HPA mag QR system

[geoffreym]

I recently got hold of a WE L85, and having previously used Gas guns, love the actual gun, but hate the gas/propane/CO2 systems which are currently available and would if at all possible modify the mags to work on a HPA system.

My idea is to have a HPA tank (with a regulator to manage the Psi) connected to the mag with a quick release system so that I can reload (albeit slowly) while not having to worry about cool down, or venting, and being able to fire full auto.

(quick image)



I've ordered a ra-tech adaptor system to see how the gun will work just on air (i've got a compressor which can maintain 130Psi).

any suggestions on what valves (have no problems tapping new threads on the bottom of the mags) I can use or anything else anybody can think of?

thanks

geoff

P.S. to Ed Na-na-na

 

[sp00n]

I actually had a similar idea about using the stock on say a m4 to hold the gas tank, then you could use standard hi caps

The only issue I can see with your idea is mag changes

 

[M_P]

Have a look at what P* users do with their guns. A lot of them use a QD valve thing close to the pistol grip so it can be removed from their person/tank quickly if needed- I think it requires a secondary regulator or something though but I've not really looked into it or anything.

 

[geoffreym]

I actually had a similar idea about using the stock on say a m4 to hold the gas tank, then you could use standard hi caps

The only issue I can see with your idea is mag changes

don't worry about quick reloads on L85's, only way I ever found was on the A1's by basically ramming the new mags onto the mag release and hoping there's enough weight to let it fall out lol.

Have a look at what P* users do with their guns. A lot of them use a QD valve thing close to the pistol grip so it can be removed from their person/tank quickly if needed- I think it requires a secondary regulator or something though but I've not really looked into it or anything.

that's the sort of thing I want, problem is I can't seem to find what sort of inlet valves they use, any links would be appreciated.