• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Upgrading my mb03

xive22

Members
Joined
May 27, 2019
Messages
5
Reaction score
0
Im thinking about continueing my project on my well mb03, its been sitting for a good while on my wall so i cant remember what i did to upgrade it but i got a 70m with a spread of about 50 cm so i guess its in a decent shape.

Im thinking about these upgrades.


-PPS CNC Zero Trigger VSR

-Big Dragon WELL MB03 510mm 

-AirsoftPro Stealcylinder TM AWS 

-Action Army Hop Up Chamber VSR-10

im not sure about spring guide and what spring i should get, and am i forgetting something? im not really on a thight budget so any suggestions should be fine!

Thank you in advance.

 
That cylinder isn't for WELL MB03, its for the TM AWS. Get a full AirsoftPro cylinder set and trigger box set for WELL MB03. AA hop chamber is fine, but that barrel is likely trash. Go for a Maple Leaf CrazyJet VSR barrel, Autobot 60 degree bucking and a Maple Leaf Omega nub.

 
Last edited:
Back
Top