• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

TM MP5 NGRS Owners

Thokarn said:
This may have been sorted earlier, but I cannot find the resolution to the issue in the post.

My MP5 throws a red light every 3 to 4 shots in the dry fire mode/bolt stop mode, on a 1100mah 20cc 7.4v lipo.

Any suggestions on what I could do before taking it to a shop?
Click to expand...
The Marui LIPO for the MP5 is 35C. try another battery with a higher C rating. For info some batteries are listed as 20C but in reality are actually 1/2 that.

 
TheFull9 said:
Most likely that's what's happening, you could look inside for white marks.
Click to expand...


Lozart said:
Yep, Airsoft tolerances and all that. The longer the suppressor, the more likely it is to not actually line up properly.
Click to expand...
 
Cheers both of you. 

Thokarn said:
This may have been sorted earlier, but I cannot find the resolution to the issue in the post.

My MP5 throws a red light every 3 to 4 shots in the dry fire mode/bolt stop mode, on a 1100mah 20cc 7.4v lipo.

Any suggestions on what I could do before taking it to a shop?
Click to expand...
Mine started to do the same thing not long ago and battery charger struggles to charge it without error messages so I'd say that's a battery issue. Probably damaged cables or cells. It's not difficult to ruin it it's so little space in the handguard.

 
Last edited by a moderator:
Any one else run into feeding issues with certain BBs
 

Only just got mine and had nothing but issues. Using some bios that I’ve not used before so I’m hope if it’s just that. 
Initially slight forward pressure on the bottom of the mag helped but now it’s just random whether it will feed on not. 
 

 
Hotweeweejef said:
Any one else run into feeding issues with certain BBs
 

Only just got mine and had nothing but issues. Using some bios that I’ve not used before so I’m hope if it’s just that. 
Initially slight forward pressure on the bottom of the mag helped but now it’s just random whether it will feed on not. 
 
Click to expand...
I'm using marui perfect hit .25s and they seem to work nicely. Good feed, consistancy and accuracy. That said they aren't cheap but they are what most marui aegs are designed around. Definitely work well with the NGRS series.

 
Hotweeweejef said:
Any one else run into feeding issues with certain BBs
 

Only just got mine and had nothing but issues. Using some bios that I’ve not used before so I’m hope if it’s just that. 
Initially slight forward pressure on the bottom of the mag helped but now it’s just random whether it will feed on not. 
 
Click to expand...
BIOs often aren't as good as non bio BBs especially if they aren't a good brand.

Personally i will not use bios in any of my rifles 

 
Does anyone know/has anyone tried a VFC retractable stock on their MP5? I can't find a replacement Marui one and hoping a VFC might fit...

 
kt82 said:
Does anyone know/has anyone tried a VFC retractable stock on their MP5? I can't find a replacement Marui one and hoping a VFC might fit...
Click to expand...
The solid stock fits but the sliding stock for the gbb has a buffer etc in it.  I'll try it later when I get chance

 
1st commando said:
BIOs often aren't as good as non bio BBs especially if they aren't a good brand.

Personally i will not use bios in any of my rifles 
Click to expand...
The trouble is my local site insists on bios, so I need to find some that are half decent and feed reliably ?

 
1st commando said:
The solid stock fits but the sliding stock for the gbb has a buffer etc in it.  I'll try it later when I get chance
Click to expand...


Any luck with the retractable stock? I have the original Marui butt and the whole locking module itself, I just don't have the two bars which retract...

If they fit, at least I can try moving them over to the TM parts...

 
kt82 said:
Any luck with the retractable stock? I have the original Marui butt and the whole locking module itself, I just don't have the two bars which retract...

If they fit, at least I can try moving them over to the TM parts...
Click to expand...
Oh good point I'll try it when I go upstairs in a bit

 
Hotweeweejef said:
Any one else run into feeding issues with certain BBs
 

Only just got mine and had nothing but issues. Using some bios that I’ve not used before so I’m hope if it’s just that. 
Initially slight forward pressure on the bottom of the mag helped but now it’s just random whether it will feed on not. 
 
Click to expand...
Think I may have found the actual reason I’ve been having feeding issues with my RIF. 
After watching a disassembly video of

the NGRS MP5, I noticed that mine is missing the spring that fits over the inner barrel and puts pressure on the hop unit when the outer barrel is installed. 
 
View attachment 131588

There is small amount of free play back and forth without it and I think may be causing misalignment with the feed lips on the mags.

Any idea where I might be able source a replacement? 

 
I've got a broken control board in my SD6. Has anyone replaced their mosfet with a 3rd party one?

 
Just incase anyone interested, the MP5 ngrs pulls around 15A continuous on full auto without firing bbs with a 8.4V Nimh. I was thinking of installing a switch so I don't have to remove the battery everytime. 



VID_20240703072041.mp4
 
Can I please ask a question as an absolute newbie to this gun and the AS world generally?

I've just purchased one of these TM MP5 NGRS and it's being delivered next week. I know absolutely nothing at the moment about batteries, the connectors or chargers.

I'm not looking for anything budget, so can anyone advise as to the best battery that fits into the factory foregrip on these and the connector required? I would also appreciate any advise on the best chargers - I am looking to add an AEG assault rifle to my collection in the near future so want something that can service all LiPo etc. Complete beginner sorry!

Any advise would be awesome and gratefully received ?

 
 
You must log in or register to reply here.

Similar threads

N
Krytac PDW M MKII - Custom Stock & Drop Stock - Mod
Replies
2
Views
3K
NeonMidnight
N
C-Diddy
Tm 416 Ngrs Changing Stock
Replies
7
Views
3K
AlphaBear
AlphaBear
Ben Savage
MP5 Project Build
Replies
3
Views
2K
PopRocket123
P
1
VFC/Umarex G3 4 years later
Replies
8
Views
6K
1st commando
1
Adolf Hamster
Hamster Buys an Lct, and Isn't Entirely Impressed……
2
Replies
20
Views
5K
Adolf Hamster
Adolf Hamster
Back
Top