TM Hi Capa 4.3 Strike Warrior

Hellfish

Hellfish

Members
Joined
Jan 15, 2009
Messages
297
Reaction score
267
I have replaced the recoil spring with a 120% one as the stock version was a bit worn/crap and now the slide doesn't lock back after the last BB is fired. 

I've not really tinkered with GBB's before so am a bit dense... 

Advice? 

 
What gas you using? Higher spring strength means more energy required to push back the slide 

 
Zero One green gas... But the slide diesnt lock back even if i manually rack it. 

??

 
Last edited by a moderator:
Put the normal spring back in it and try again, always do a process of elimination.

 
Hellfish said:
I have replaced the recoil spring with a 120% one as the stock version was a bit worn/crap and now the slide doesn't lock back after the last BB is fired. 

I've not really tinkered with GBB's before so am a bit dense... 

Advice? 
Click to expand...
Click to shrink...


Are you sure you bought one that is doubled over like the stock one? Due to the short barrel length it requires it. 

 
Ahh... I did wonder why the stock spring was like that. No. Its just a standard spring, not doubled over.... 

 
Hellfish said:
Ahh... I did wonder why the stock spring was like that. No. Its just a standard spring, not doubled over.... 
Click to expand...
Click to shrink...
I am afraid you have the wrong spring

The Strike Warrior has the shortest inner barrel of any GBB at 74mm so it needs a doubled over spring in order to give a decent kick and slide return. Otherwise the spring is just not powerful enough. ?

 
Last edited by a moderator:
Can any of you guys point me in the right direction of a retailer and the right spring? 

 
See, I thought the Strike Warrior r was just a tarted up 4.3.... ?

 
You must log in or register to reply here.

Similar threads

M
EMG / golden eagle strike industries m870 handguard
Replies
0
Views
53
MTW
M
Back
Top