Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
The 'What have you just bought' Thread
- Thread starter Cameron364
- Start date
Happy
Members
- Mar 23, 2014
- 1,062
- 669
Knew they were planning on releasing one, didn't know when though. Will be my next big spend once my cars mot is out the way
AirsoftTed
AF-UK patch owner
- Sep 30, 2012
- 1,003
- 663
SHS m100 spring to get my M4 useable (Came in at 365 even after all the usual hop up magic and 6 magazines through it) so I should be back in the game shortly! (God knows I need it, I've gotten unfit as f*ck!)
Almightybeardedkial
Members
- Sep 28, 2014
- 84
- 19
airsoftwarrior147
Members
- Aug 16, 2012
- 578
- 140
My latest purchase
-replica Blackhawk! Serpa with belt paddle and belt loop-£10
-tan riggers belt-£10
Hopefully later today I'll be buying BLACKHAWK! knee pads and a 3d printed scope mount
-replica Blackhawk! Serpa with belt paddle and belt loop-£10
-tan riggers belt-£10
Hopefully later today I'll be buying BLACKHAWK! knee pads and a 3d printed scope mount
Chock
Members
- Sep 2, 2014
- 687
- 547
Replacement steel hammer set for one of my TM clone Kimber GBB pistols. 15 quid from some Hong Kong website I've never heard of, so fingers crossed eh? :lol:
Just also bought a spare mag for that Galaxy MP5K PDW I ordered, not that I should need to swap mags on something with a high cap mag, but I prefer to have a second mag for all guns in case one of 'em goes tits up. It was about a fiver from AEG cart Asia and is actually not listed as being for the G5, but as that G5 is basically a TM clone, I assume it will fit, I also got a GBB valve key to make it worth paying for the postage. Also 15 quid in total.
Just also bought a spare mag for that Galaxy MP5K PDW I ordered, not that I should need to swap mags on something with a high cap mag, but I prefer to have a second mag for all guns in case one of 'em goes tits up. It was about a fiver from AEG cart Asia and is actually not listed as being for the G5, but as that G5 is basically a TM clone, I assume it will fit, I also got a GBB valve key to make it worth paying for the postage. Also 15 quid in total.
Last edited by a moderator:
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
cheap metal D-Boys 416 just arrived today....
http://gunfire.pl/product-eng-1152194525-BI-8001-carbine-replica.html
discount ends now to get it for 160 Euro or about £125 using DEAL
(deal or DEAL seems to have ended - was very tempted to buy another but gone mad already)
way too hot 405fps
but will tweak it down check AOE fet etc....
(they do offer free spring downgrade they say, but I will open her up & break it no doubt)
Hop-up is supposed to be not brilliant but no biggy - yet seemed reasonable but only fired about 30 or so shots
mag is crap too but dytac's work fine, stock yeah not best crane - unsure might change it or use better G&G crane
(stubby won't look right but then is easier, have a Firehawk or Magpull clone type but tube battery limits bat size)
Yeah it needs a few tweaks but then all no big major issues - well I like it for the price
but is nigh on identical looking to a WE 416 @ LWA at half the price delivered
(no TradeMarks on either one but I ain't that rich to buy a VFC etc... - better than a Cyma 508 though)
Son wanted WE - (yeah well I'm still looking for that 3-some with mum's fit m8 I mutter)
but that ain't gonna happen so shut up & make do ffs, life's a bitch
http://gunfire.pl/product-eng-1152194525-BI-8001-carbine-replica.html
discount ends now to get it for 160 Euro or about £125 using DEAL
(deal or DEAL seems to have ended - was very tempted to buy another but gone mad already)
way too hot 405fps
but will tweak it down check AOE fet etc....(they do offer free spring downgrade they say, but I will open her up & break it no doubt)
Hop-up is supposed to be not brilliant but no biggy - yet seemed reasonable but only fired about 30 or so shots
mag is crap too but dytac's work fine, stock yeah not best crane - unsure might change it or use better G&G crane
(stubby won't look right but then is easier, have a Firehawk or Magpull clone type but tube battery limits bat size)
Yeah it needs a few tweaks but then all no big major issues - well I like it for the price
but is nigh on identical looking to a WE 416 @ LWA at half the price delivered
(no TradeMarks on either one but I ain't that rich to buy a VFC etc... - better than a Cyma 508 though)
Son wanted WE - (yeah well I'm still looking for that 3-some with mum's fit m8 I mutter)
but that ain't gonna happen so shut up & make do ffs, life's a bitch
Last edited by a moderator:
straffham
Members
- Feb 1, 2014
- 714
- 272
ICS AR / M4 / M16 Flash Hider 14mm CCW @ £15.00 (For my Galil SAR as its nearer the correct early type than a birdcage)
Strike Mount (M4/M16) higher mount base @ £15.00 (to raise my Vector Condor 2x42 sight instead of a carry handle mount)
From Firesupport.
Strike Mount (M4/M16) higher mount base @ £15.00 (to raise my Vector Condor 2x42 sight instead of a carry handle mount)
From Firesupport.
BBrotherwood
Members
- Jul 6, 2014
- 235
- 212
Finally ordered 3 more mags to bring my total of WE M4 mags to 7, enough to stand a chance at playing with the L85 now 
37 euro's a piece from Gunfire.pl and free shipping.
37 euro's a piece from Gunfire.pl and free shipping.
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
Sort of airsoft related.....
Various heatshrink tubing for wiring/fets
larger wattage soldering iron for doing deans
£3 mini scales - drug dealer kind as old kitchen scales was dying (20+ yrs old)
no not for dealing but for weighing pistons - this one does gms in 0.1g increments
(30gms vs a 15gms complete piston can make quite a difference to avoid PE at high speed)
plus suppose it would take the guesswork out of:
are these .20's or 0.25g bb's etc.....
Various heatshrink tubing for wiring/fets
larger wattage soldering iron for doing deans
£3 mini scales - drug dealer kind as old kitchen scales was dying (20+ yrs old)
no not for dealing but for weighing pistons - this one does gms in 0.1g increments
(30gms vs a 15gms complete piston can make quite a difference to avoid PE at high speed)
plus suppose it would take the guesswork out of:
are these .20's or 0.25g bb's etc.....
Chock
Members
- Sep 2, 2014
- 687
- 547
Can picture the scene now. The fuzz pop round to ask about next doors' missing cat, they look through the kitchen window, to see you at the kitchen table with some scales typically used for weighing out drugs, and with what appears to be an AKS74U sat on the table within easy reach. Presently, an Aerospatiale Gazelle with what looks like some guys in black outfits equipped with MP5s and rapelling harnesses, hanging of the skids, approaches low over the rooftops. The pilot adjusts his NVG goggles and quietly chats into the radio as he pulls the nose up to go into a hover: 'ten seconds guys...' 
h34r:
h34r:
Last edited by a moderator:
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
What with your collection of AK's & my quest to own any M4 under say £150....
think we would have serious explaining to do if we got a visit.....
Yeah - yeah of course sir, now you can explain it all down the station
whilst we ask for yet another van to collect the rest of your so called collection of toy guns
think we would have serious explaining to do if we got a visit.....
Yeah - yeah of course sir, now you can explain it all down the station
whilst we ask for yet another van to collect the rest of your so called collection of toy guns
Similar threads
