The 'What have you just bought' Thread

MrTea · Mar 9, 2026

BespokeAirsoft had a sale on the original UShot/TTI TP-22 so I snagged one. Ordered a few mags from EhobbyAsia and 3D printed the baseplates because they're silly expensive for what they are. From WGCShop I've got some external parts like a comp, outer barrel, trigger, extended mag release and a new inner barrel. I've already got a 4uantum GBB rubber ready to go in.

Now I just need a holster. Most airsoft brand X300 holsters don't work and it's too easy for the pistol to come out. The original TP-22 holster from UShot is impossible to find in stock anywhere that will ship to the UK and I don't want to use Novs open holster. The TP-22 fits in my Blackhawk Omnivore but not with the optic on as it sits too far forward, i'd need to dremel some of the front of the holster away to let the optic fit but i'm not keen on modifying a £80 holster - may just run it without an optic for now.

Rickwales · Mar 10, 2026

New SMG. Got this and the DMR on its way. At those prices I had too.
Couple of add ons like the fore grip. Already had it apart and lubed it up. Couldn't get the barrel but off tho unfortunately. I'll need find a tool that fits it. Got plumbers grips somewhere.
Just off to the garage to test it.

Rickwales · Thursday at 2:29 PM

Rickwales said:
New SMG. Got this and the DMR on its way. At those prices I had too.
Couple of add ons like the fore grip. Already had it apart and lubed it up. Couldn't get the barrel but off tho unfortunately. I'll need find a tool that fits it. Got plumbers grips somewhere.
Just off to the garage to test it.

Unfortunately it's going back... Works brilliantly single shot, not on full auto tho. Can't fault retailer, they paying postage and will send replacement.
Gutted.
On the positive side, finally got hands on a cheap drum mag for my krinkov. Love the look now.

Rickwales · Saturday at 5:44 PM

It's a fugly beast, but it shoots well. Wanted an aep for the bad weather days.

Cannonfodder · Saturday at 6:14 PM

Elcan specter dr sight. I'll put a quick review up after I've used it

SimonDJXC · Saturday at 6:23 PM

I just bought the new Novritsch thermal pane lens heater thing. Anyone used it? It seems very new. heats your lense so you get rid of the sweat, I NEVER believe the hype on non fog, because no fog doesnt equal no sweat and that has to go somewhere.

Will let you know how it works.

https://eu.novritsch.com/product/antifog-heater-lens-insert/

Barny · Saturday at 7:50 PM

I've been on the hunt for some "nice" HK417 mag holsters for a while now. Eventually stumbled onto an old post that British Tactical made some of their MAGPi type holsters for them.

Tried some Tasmainian Tiger ones but theyre bungee and i cant stand silly string all over the place

A few messages quick messages on Instagram and voila! Here they are.
I use the MAGPi on my 5.56 + 7.62 rigs so it keeps it all quite uniform through out

ButcherBill · 2026-03-16T17:54:32+0000

APFG XM7
Magpul CTR stock
558 EOTECH clone & 3x magnifier
MAWL 1
Magpul rails types 1 & 2
Magpul Foregrip
Sig SLX suppressor

All in 10 different shades of FDE

Austeyr · 2026-03-16T18:05:24+0000

ButcherBill said:
APFG XM7
Magpul CTR stock
558 EOTECH clone & 3x magnifier
MAWL 1
Magpul rails types 1 & 2
Magpul Foregrip
Sig SLX suppressor

All in 10 different shades of FDE
View attachment 18980
View attachment 18979

That turned out looking mega

mightyjebus · 2026-03-16T18:25:23+0000

full metal FZ Shoot PEQ. 1600 lumen torch, plus very bright red light, Green laser and IR laser. All for about £64 from aliexpress. everything can be zero'd. Red and white lights can be set to 50% and in any mode can strobe (laser, whit and red lights). It's USB chargeable and uses a similar charger to the Olight stuff.

stupidly cheap for how good it is.
link here: https://www.aliexpress.com/item/100....order_list.order_list_main.17.f39918026Ib8Yc oh and can be swapped from MLOK or picatinny.

BigAl · 2026-03-16T21:05:23+0000

mightyjebus said:
full metal FZ Shoot PEQ. 1600 lumen torch, plus very bright red light, Green laser and IR laser. All for about £64 from aliexpress. everything can be zero'd. Red and white lights can be set to 50% and in any mode can strobe (laser, whit and red lights). It's USB chargeable and uses a similar charger to the Olight stuff.
stupidly cheap for how good it is.
link here: https://www.aliexpress.com/item/100....order_list.order_list_main.17.f39918026Ib8Yc oh and can be swapped from MLOK or picatinny.

That an airsoft creation or replica or a real unit?

mightyjebus · 2026-03-16T21:54:50+0000

not quite sure but the blurb on the aliexpress description says "The flashlight passed the 1.2m drop test" so most likely would be fine for RS.

Colin Allen · 2026-03-17T11:33:26+0000

Colin Allen said:
To quote the Lad: "Jesus, that thing is ugly."
View attachment 15870
In addition to all the usual internal upgrades, I am going to sand the stock down and varnish it.

The possibly finished article; I might change the pistol grip for a wooden one.

Original gearbox internals except for the electrical gubbins.
Perun V3 Hybrid
XT inner barrel
Maple Leaf Macaron and Omega nub (nub cut down to work in the hop unit)
Hop dial modified to prevent the fake bolt hitting it and turning it
Rewired to rear
Stock sanded down, three layers of wood stain, two layers of satin varnish
Front sight secured to the barrel to prevent it wobbling
L85 sling

1.04J

Austeyr · 2026-03-17T11:34:55+0000

Colin Allen said:
The possibly finished article; I might change the pistol grip for a wooden one.

View attachment 19071

Original internals except for the electrical gubbins.
Perun V3 Hybrid
XT inner barrel
Maple Leaf Macaron and Omega nub (nub cut down to work in the hop unit)
Hop dial modified to prevent the fake bolt hitting it and turning it
Rewired to rear
Stock sanded down, three layers of wood stain, two layers of satin varnish
Front sight secured to the barrel to prevent it wobbling

1.04J

Dado · 2026-03-17T12:31:40+0000

hi everyone, this came yestrday, quite heavy scope, unusual mount

Brutuz · 2026-03-17T13:04:24+0000

AG-17

MrTea · 2026-03-17T20:31:05+0000

Something else I didn't post at the time but I bought this a while ago from a user on here before the forum revamp was done. Can't remember who it was but it was an unbelievable steal considering the parts that are installed.

KC-02 with the following parts (RW is RogueWorx);

RW Projnut
RW Genesis Kit - hop unit and nozzle that allows use of normal VSR barrels
RW TDC wheel
Maple Leaf Inner Barrel (IIRC)
Flamingo 60 hop rubber
RW Aluminium bolt carrier - gold (I bought this to replace the solid state bolt originally installed)
RW CNC V3 piston (I bought this to replace the stock piston)
RW Morpheus charging handle base with L85 style charging handle
RW Silent buffer pin
RW Sickle mag release
Pinty 3-9x50 scope
Generic bipod
Foam filled suppressor
ICS UKSR Stock (I bought this to replace the Magpul CTR stock it originally game with)

Originally it came with the RW Solid State Bolt which turns it into, essentially, a bolt action rifle. I swapped it back and returned it into a semi-auto DMR. On CO2, it sits nicely around the 450fps mark. It did also come with a HPA adapter which uses MP5 mags so I may just use HPA to avoid having to shell out a load of cash on mags. I did originally test it on HPA but my regulator needed a service which I sent off to CMAirsoft.

More recently, I remembered StackupAirsoft had a wooden stock for a KC-02 for sale. Luckily, it hadn't sold so I managed to snag that too. Using the wooden stock does mean I have to chop off the rear tang of the KC-02 - not something i'm super hyped about but apprently modifying the stock is a pain. According to the people on the RogueWorx discord, the Boyds stocks are very hard to get in the UK and I actually got a really good deal.

Colin Allen · 2026-03-17T20:34:47+0000

MrTea said:
Something else I didn't post at the time but I bought this a while ago from a user on here before the forum revamp was done. Can't remember who it was but it was an unbelievable steal considering the parts that are installed.

KC-02 with the following parts (RW is RogueWorx);

RW Projnut

RW Genesis Kit - hop unit and nozzle that allows use of normal VSR barrels

RW TDC wheel

Maple Leaf Inner Barrel (IIRC)

Flamingo 60 hop rubber

RW Aluminium bolt carrier - gold (I bought this to replace the solid state bolt originally installed)

RW CNC V3 piston (I bought this to replace the stock piston)

RW Morpheus charging handle base with L85 style charging handle

RW Silent buffer pin

RW Sickle mag release

Pinty 3-9x50 scope

Generic bipod

Foam filled suppressor

ICS UKSR Stock (I bought this to replace the Magpul CTR stock it originally game with)

Originally it came with the RW Solid State Bolt which turns it into, essentially, a bolt action rifle. I swapped it back and returned it into a semi-auto DMR. On CO2, it sits nicely around the 450fps mark. It did also come with a HPA adapter which uses MP5 mags so I may just use HPA to avoid having to shell out a load of cash on mags. I did originally test it on HPA but my regulator needed a service which I sent off to CMAirsoft.

More recently, I remembered StackupAirsoft had a wooden stock for a KC-02 for sale. Luckily, it hadn't sold so I managed to snag that too. Using the wooden stock does mean I have to chop off the rear tang of the KC-02 - not something i'm super hyped about but apprently modifying the stock is a pain. According to the people on the RogueWorx discord, the Boyds stocks are very hard to get in the UK and I actually got a really good deal.

View attachment 19272

That wood stock is gorgeous!

The 'What have you just bought' Thread

Members

Members

Attachments

Members

Attachments

Members

Attachments

Members

Members

AF-UK patch owner

Members

Members

Members

Members

Members

Members

Members

New member

Attachments

Members

Members

Members

Similar threads