The 'What have you just bought' Thread

[Ian_Gere]

Gate Electronics Pico SSR2 MOSFET - £13.50 posted / on sale from fire-support.co.uk - get 'em before they're gone!

Thanks to Igilmour for that heads up

 

[Mack]

Army Armamament R17 (G17) - http://www.taiwangun.com/en/r17-black-army?from=listing&campaign-id=14

Spare Mag - http://www.taiwangun.com/en/magazine-for-r17-army-2?from=related&campaign-id=6

Clone Crye Gun clip - http://www.taiwangun.com/en/holster-clip-for-replicas-of-glock-coyote-acm?from=listing&campaign-id=14

Total - £81.54 posted

1st impressions of this pistol are good. For £43 I wasnt expecting TM or even WE standards but have been pleasently surprised. Blowback is crisp and snappy. Its pretty loud too and has decent enough trades. It could probably be doing with an upgraded recoil spring as the standard one feels a bit "meh". Gas wise im getting about 1 and a half mags per fill of propane. The gunclip itself was a little tight at first but after a few holsters and draws it loosened up a bit. Hold the gun securely with very little movement on the belt. Will take a little getting used to drawing to the side rather than up.

 

[Lozart]

Yay! It's here!

 

[TheFull9]

Few bits from a company called Whiskey Two Four, who seem to be a bunch of paintballers but they design some really good and innovative stuff.

The hypalon straps do the same job as MALICE clips but they're much lower profile, removing the potential to jab and dig in to you. The multicam loop pieces I didn't actually order but they dropped them in anyway; they slot between any PALS webbing so you can have velcro absolutely anywhere on your modular gear. The smaller bits are hypalon zip pull replacements, again I only ordered the two plain ones but they chucked in a set with UJs. My main interest are the MALICE replacements, if they work when I try them I'll be ordering a LOT.

 

[M_P]

Looks like some nice stuff, I like the velcro (I hesitate to call them panels) things.

 

[Airsoft_Mr B]

Few bits from a company called Whiskey Two Four, who seem to be a bunch of paintballers but they design some really good and innovative stuff.

The hypalon straps do the same job as MALICE clips but they're much lower profile, removing the potential to jab and dig in to you. The multicam loop pieces I didn't actually order but they dropped them in anyway; they slot between any PALS webbing so you can have velcro absolutely anywhere on your modular gear. The smaller bits are hypalon zip pull replacements, again I only ordered the two plain ones but they chucked in a set with UJs. My main interest are the MALICE replacements, if they work when I try them I'll be ordering a LOT.

Awesome! Seen them before and wanted some for a while. How was shipping?

 

[TheFull9]

Took a little while but compared to the shipping from the big gear retailers in the states it was substantially more affordable for sure.

 

[dex]

A TM recoil scar l cqc.

 

[Zak Da Mack]

Fobus GL-3 Glock 20/21 holster

Ohh, linky?

 

[Airsoft_Mr B]

Ohh, linky?

Here ya go

http://www.gunpointgear.co.uk/fobus-glock-20--holster-753-p.asp

 

[pierce09]

Mmmmm some new Crye....

Excuse the potato pic!

 

[dex]

A TM recoil scar l cqc.

Pic:

 

[Zak Da Mack]

Here ya go

http://www.gunpointgear.co.uk/fobus-glock-20--holster-753-p.asp

Excellent. Is it belt or molle loop?

 

[Airsoft_Mr B]

You can have a paddle or belt version. You can get MOLLE adapters for em but I've never seen em for sale in the UK. I dunno if IMI stuff would actually work with it or not but their MOLLE adapter things are only £7 or £8

 

[PT247]

Crawley Surplus Store (http://www.surplusstore.co.uk/) sell Fobus holsters

 

[Zak Da Mack]

You can have a paddle or belt version. You can get MOLLE adapters for em but I've never seen em for sale in the UK. I dunno if IMI stuff would actually work with it or not but their MOLLE adapter things are only £7 or £8

Crawley Surplus Store (http://www.surplusstore.co.uk/) sell Fobus holsters

Thanks for the help you two. I'll see if I could put the molle adaptor on, if not, I suppose I could bodge up something

 

[PT247]

I have both molle and belt adaptor for my TM G17/G18, for the GLOCKs you need to be specific on the brand you own as they are different sizes. I went for the holster that allows attachment of a pistol flashlight, works really well.

 

[Airsoft_Mr B]

WE Gen 4 Glock 17! (and thread adaptor)

 

[Monty]

Looks great.

 

[joshcowin]

A 552 eotech and a hand grip for the scar

List of what I'm going to buy:

3x magnifier

Mad bull gbb and hop rubber

Mags

Atacs Ricas and clothing

We gen4 g17

Rail covers