The 'What have you just bought' Thread

[Ian_Gere]

Kanzen Bearings for Vz61 Skorpion - €20 posted ~ fleabay

MAG Magnesium Piston & 130% Spring for Vz61 Skorpion - $41.28 posted ~ Airsoft Global

SHS Steel Vz61 Gears - $7.86 + $16.56 P&P ~ airsoft.tiger111hk.com

D-Boys 190mm Aluminium Outer Barrel - $10.64 + $6.96 P&P ~ airsoft.tiger111hk.com

D-Boys AKS-74U Front Sight - £14.98 posted ~ dualdealshop on fleabay

CYMA Metal Hop Up Chamber for AK - £9 posted ~ dualdealshop

AK/M4 Stock Adapter Model A - $13.98 posted ~ ebairsoft.com

Soviet Russian Army Respirator PBF EO-19 - £18.99 posted ~ fleabay

 

[M_P]

Who's Granny have you sold to pay for that lot ! :lol:

I sold off most of the population of Eastbourne.

 

[AirsoftTed]

Are North Korea starting a bowls team or something?

 

[M_P]

No they're hosting the bingo world championship next April

 

[Albiscuit]

Viper Multicam M4 double pouch

Offset rail adaptor

Torch holder for above, only to find my torch does not fit GRR

And attempted to buy a RIS front end for my MP5K to be told "we cant find it sir", left my number, 2 hours later, "we have found it, do you still want it" GRRRRR

So spent money, but a few GRRRs lol, will pop back to the store tomo and finish up my Mp5K FINALLY

 

[clumpyedge]

25 flash bangs

15 high emission smokes

15 mk3 remote dets

12 thunder b trip mine shells

Element scout torch

Contour lens protector

NATO patches

First aid packs

16gb micro SD card (for contour)

 

[Happy]

Yet another mag for my ASG MK23 Socom @ £26.99 with free postage.

I swear this thing is turning into my primary weapon since I use it so much. Since the fixed hop is great for .3g BBs, I may look at putting in a new inner barrel, adding a scope rail and turning it into a Designated Marksman Pistol like I saw someone do on a different forum haha

 

[Monty]

A bunch of bits from MateyGuv and trigger contacts for my PDW as I fucked up the wiring.

 

[straffham]

AK/M4 Stock Adapter Model A - $13.98 posted ~ ebairsoft.com

Hey Ian, which AK versions will that adapter fit? I have an old Cyma CM 028s which I'd like to do something similar with as the folding stock broke so filled the holes in the stock and fitted an AIMS foregrip to a modded front end, hence needs a stock sorting now.

 

[straffham]

ZCI V2 gearbox shell - quick release spring

ZCI Aluminium black cylinder

ZCI reinforced steel 14 tooth piston

From our very own ak2m4 Pete.

www.ak2m4.co.uk

 

[Ian_Gere]

Hey Ian, which AK versions will that adapter fit? I have an old Cyma CM 028s which I'd like to do something similar with as the folding stock broke so filled the holes in the stock and fitted an AIMS foregrip to a modded front end, hence needs a stock sorting now.

It fits the G&P fixed stock receivers and, I think, King Arms also. It wont go on a CM.028S. You can get replacement under-folding stocks. What went wrong with it, the catch (so it hangs loose)? If so you can replace it with the cheap one from taiwangun.com - the catch is no more nor less robust on the more expensive one (this is a problem i have dealt with using both the cheap one and the steel one).

 

[straffham]

It fits the G&P fixed stock receivers and, I think, King Arms also. It wont go on a CM.028S. You can get replacement under-folding stocks. What went wrong with it, the catch (so it hangs loose)? If so you can replace it with the cheap one from taiwangun.com - the catch is no more nor less robust on the more expensive one (this is a problem i have dealt with using both the cheap one and the steel one).

Ah right, no the arm on the side that latches snapped clean off due to being made of cheese. Trying to avoid the expense of a whole new receiver and stock assembly tbh, and in any case an under folding stock won't work now with the AIMS wood foregrip hence thinking of some sort of M4 adapter. May yet attempt to make one from resin embedded with fibreglass as a specific fit. Cheers Ian.

 

[team flex]

1x clone G&G HI CAP 450 rds.

1x 3000 .25 bbs devil blasters.

1x fosco 400ml flat black paint.

Hopefully tomorrow a tactical vest, I'm excited.

around £70 spent, which is a bit of what I was saving up back to square one

 

[team flex]

just bought the latest issue of airsoft international I'm excited

 

[Russe11]

5.5mm brass tubing - This is for the manufacture of a brass pull through for my SMLE. Plan is to cut a length and fill it with epoxy and embed the end of a length of string. This is instead of having a cleaning rod. The idea is that you use the brass weight to pull the string through the barrel and the end of the string has a small loop so you can then pull a piece of rag through the barrel to clean it.

Brass coloured metallic Humbrol Enamel - to add weathering and detail to my scope so it looks more correct. Also to paint the end of the pull through so the epoxy doesn't show.

 

[Esoterick]

A load of warrior assault systems stuff:

PLB Belt and harness, 2 double 5.56 pouches, 2 quick mag pouches and a dump pouch all in OD. I wanted to get a TM M870 breacher this month but don't think I can afford it

 

[EvilMonkee]

You mean the latest issue of 'So you want to be a Navy SEAL International'?

It gets a bit tedious

 

[Bottledtorment]

Ultra light replica of Spec-Ops MICH High-Cut Helmet - Tan

Green Gas Magazine

Double pouch for two G36/AK-74 or four M4 magazines – multicam

Hi-Cap magazine for G36/SL8 Series

MOLLE Universal Pistol Holster - Multicam

130 mm silencer

Can of Halford Green camo paint

 

[team flex]

You mean the latest issue of 'So you want to be a Navy SEAL International'?

It gets a bit tedious

mate i just spent £6 fecking quid and now you tell me?!?!?

 

[Happy]

Krylon Flat Olive Drab spray paint

ASG M90 Ultimate Spring

£23 from Patrolbase