• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

I got my WADSN Unity / hotbuttons:

View attachment 82815

View attachment 82814###

FuHW1La.jpg


Need to swap the button behind the dbal back to a button with a RAMP, not enough room in front of the eotech to easily get my thumb in there.

Like this:

LrwRAer.jpg


Only it'll be a tan button with a smaller connector.

 
Last edited by a moderator:
One of my Xmas presents to myself has come in the post... :)

uKjZ-cW1m7xilH1lbVT_zHzgNLVRrosTljgs8COXQBESSWdYGmZ3wLaNNVxj1YJ_AVti-Ri69JPNkpc4ZSRwrRxqMe0Ntoeaivok2f0pekEthLLuLiMctLcSx5LDK-2DHOUSqrFYpWpn4avKO0XqjwW0tUUmOgLg8LxnV0iBZ7wlFmnaFPGMotcmSU0LzUtwJEP6_ePKogneiovX7RSLjQHwJykmg_IELl8lmiGnoI_-F6y5nAbU_izwWiksNaAhdvdcrKAFSSmCzLCh08o8pqLkoN2yuRwmwXG8hNqdPvTiPnDM7i809zIyXOtnupL9mt7tcMzN8VyjBPbugS76zBquZBKCJ8R0BA3NOhzV3H2wTxs7yGruzswmwWkwUPElr8xpp9uZ8YiQtzYmDoXx9BVJKi93ETlOK5IZQ7507tZm0PdzoMcJoqmrpKc3RCvIGnULDfbdq9QYRG3X1uDiPFnFg2z_vzCztgIQBEGi-ibJTLZOWl19X50W_Ty2km_9QtS23xbShtx7lkaG3lDVaHTYUBplt_M_7iPWeEoOaND3UkbtnsRcMqlLxCQfZVwelkcBKd1SS1t3hDvx0rSMso4_yHSTynXIztMwvKW0QXHFXXKKSjahg0ao9fI9bGVAMBuijXP8NxHronevJjt_ONGWTvUQnGmlb_pquPJ8Q3yYxQ0Lyy_NZJTKQcxzX_mAmm8NAMJRy84Y_TCo0Fci7oZ7=w623-h1280-no


All the credits are my teams guys.... 

 
Santa (UPS) arrived early this year...

View attachment 82820

But I'm not going to open the box until Christmas morning.

Oh, the anticip......

.... ation :)

Also... 18,000 Bio 0.28g BBs, an M105 spring, and a nozzle and fuses for my AK.

 
Last edited by a moderator:
I got my WADSN Unity / hotbuttons:

View attachment 82815

View attachment 82814###



Need to swap the button behind the dbal back to a button with a RAMP, not enough room in front of the eotech to easily get my thumb in there.

Like this:



Only it'll be a tan button with a smaller connector.
Your ability to keep finding new stuff to strap to your poor SCAR never ceases to amaze me

 
ups actually managed to deliver something ? Holy shit, it's a Christmas miracle !


AND he knocked on the door and waited until someone answered! (Admittedly it was me, and it took me approximately 3.2 seconds to run down the stairs as I got that spidey-sense tingle, in spite of the fact that just 4 minutes prior I'd sent an email to JD Airsoft to ask if my gun had been sent yet, as the order status was still 'preparing'!)

And he smiled nicely and wished me a happy Xmas.  So actually an effort 'Worthy Of Laudation' from the UPS chap this time.

 
Not exactly exciting, but I bought an AK sling from Ant Supplies.  I must have a silly number as I put one on each rif, even the Imperialist ones.  The leather tabs always need a good soak in leather food, but then I expect them to be as long lived as my 1940's Mosin sling. 

However... this one has a new 'leatherette' style of tab which is thin and lacks grip around the stud.  The canvas is thinner and flatter, and the buckle is now ridiculously oversized as a consequence.  

Shame as these have always been a real bargain.

View attachment 82827

View attachment 82828

 
Belated Merry Christmas everyone. Hope Santa brought you all lots of nice airsoft toys.

Unusually flush due to a long nightshift and lots of on call last month, bought a smorgasbord of useful stuff today via Amazon and PB.

Mr. Bezos sending me glue gun sticks and plastikote so I can finish my Sci Fi Armour project, a couple of mag pouches and a garden hose as my now sorted motorbike is badly needing washed... meanwhile, a minor spending spree at PB netted a couple of hi caps, scope rings (for a 4x40 Simmons I'm acquiring in the new year) and a 200mm dummy suppressor to make my squat UAR look a bit leaner and meaner. Or something.

 
The Minox scopes are tremendous value.  I'd plumb for one over a Simmons tbh.  Have a look at Sportsman Gun Centre perhaps.

 
Just purchased a few cnc items from Pablo Vila Ferrero in the GHK owners Facebook group. Not cheap, but should be worth it.

If you have to ask, you don’t deserve to know what they are ?
Hopefully here within a week or so from Madrid ?


So these arrived today

Holy Shit these are BEAUTIFULLY made!!!

Taking apart the mags was a bit of a dick dance as they have never been apart before, but fitted now and look exquisite 

Thanks @Pablo Vila Ferrero

 
Last edited by a moderator:
Back
Top