The 'What have you just bought' Thread

[alxndrhll]

Fair enough, guess my mind just immediately thought of a Gate Titan etc. In all my years playing airsoft, I think I've only ever come across one stock NGRS and one stock VSR.

That's one more stock VSR than I've seen in 15 years of being in/around the hobby ?

 

[Druid799]

Fair enough, guess my mind just immediately thought of a Gate Titan etc. In all my years playing airsoft, I think I've only ever come across one stock NGRS and one stock VSR.

My self and my three team mates who run TM recoils all run them stock , only ones I’ve ever had upgraded (two by professionals and one by a ‘tinkerer’) all went tits up . My pet theory on the subject is as its a well known fact TM only care about the home market and quite frankly couldn’t give a flying fornication about what the rest of the world ‘needs’ or wants all there guns are made to the finest tolerances to suit the very strict fps rules they have there in Japan . Hence once you do start ‘fiddling’ with them your going to alter those tolerances and basically unless you do a total ‘gut and rebuild’ sometime in the near future your gun is going to implode (as happened to the three I had) where as my stock guns are still running fine even up to 14yrs later . About all I’ve ever done to them maintenance wise is every couple of yrs I’ll take the motor off and give em a blast with a can of silicon oil up in to the gearbox but that’s it , even still got the original hop rubbers in them (except one G36 I put a maple leaf hop rubber and nub in to see if it would increase the range, it didn’t ! ?‍) just my humble personal opinion , but this does come with the caveat of when ‘opinions’ are voiced just remember  “an opinion is like an arse hole , everybody has one and there frequently full of shit !” ???

 

[PopRocket123]

I'm keeping it nice and boring. Picked up a bunch of screws and nuts for a couple of 3d printed parts, including my first order

View attachment 71011

View attachment 71012

 

[Alimcd]

My “be a total tosser” response was itching after finishing a nice, restrained M14 build so I’ve gone and bought a Gold Airsoft Masterpiece Hi-Capa frame 

 

[Asomodai]

So a retailer had me over on a Nikko Stirling Mountmaster scope. Was told it was back ordered till about October despite being told 14 days on ordering. 

Asked for my money back, I just picked up a heavily used Phillipino Simmons Whitetail Classic 3.5-10x50 for a little over 50 quid. 

The air rifle forums seem to like them so hoping for good things on my SRS.

 

[Alimcd]

My “be a total tosser” response was itching after finishing a nice, restrained M14 build so I’ve gone and bought a Gold Airsoft Masterpiece Hi-Capa frame 

Scuppered. Not for the first time is something showing on Bunnyworkshop’s website not available.

Wasn’t to be

 

[CrackCommandoUnit1972]

Tune up kit for my cm.702 sniper. 

View attachment 71071

 

[Steveocee]

Scuppered. Not for the first time is something showing on Bunnyworkshop’s website not available.

Wasn’t to be

Give Hi Capa Hub a shout, he's just messaged me a picture of some AM frames.

 

[Alimcd]

Give Hi Capa Hub a shout, he's just messaged me a picture of some AM frames.

He's got a black 2011 one in that order with my name on it. Probably for my own sake, he didn't get any gold

 

[Guest]

View attachment 71092

 

[Spartan09]

Well, i decided "fuck it, whats another £170-odd on my credit card"  and bought myself an S&T M320 grenade launcher.

Mounted it on my tippmann via a set of m-lok to picatinny rail adapters i bought a couple of months ago.

I did find that the launcher had a lot of wobble on the rails, so i found a pair of screws in my toolbox at work and used them to pin the launcher...  just need to trim them down a few mm and paint them black so they dont stand out.

Edit.

also set up an account with enola gaye, and will be ordering some pyro from them next week

View attachment 71146

 

[Asomodai]

Its a gear day rather then a RIF day! 

Invader Gear Revenger BDU Italian Vegetato

Invader Gear Revenger BDU Combat Trouser Italian Vegetato

Invader Gear Flannel Ubacs in Blue

Invader Gear Boonie Bush hat in Vegetato

x2 Viper Shotgun Cartridge holder

MFH Large Radio pouch in Green

Z-Tactical Xo29 Bowman style Headset Evo 3

Z-Tactical TCI PTT Z114

I really hope the sizing of the clothes is correct for me! 

 

[GothicGhost]

New stock for my carbine kit

View attachment 71153

 

[alxndrhll]

The arrival of my Ferro Mini Dangler and Crye Stretch Flap sees both of my chest rigs finished (at least for now). The AirLite is set up for when I’m running an AR or AK74, the Microfight is setup for running pistol only in CQB or my VSR (turns out Spiritus Pistol inserts take VSR mags pretty nicely).

And a Vortex Crossfire, pair of NGRS mags and a Laylax NGRS wrench for my birthday from my long suffering girlfriend.

View attachment 71159

 

[Barny]

So a retailer had me over on a Nikko Stirling Mountmaster scope. Was told it was back ordered till about October despite being told 14 days on ordering. 

Asked for my money back, I just picked up a heavily used Phillipino Simmons Whitetail Classic 3.5-10x50 for a little over 50 quid. 

The air rifle forums seem to like them so hoping for good things on my SRS.

I've one similar - its a 44mm - on my Air Arms S410. Lovely scope and i'm sure you'll like it too ? 

I recently picked up these from Real Airsoft UK on eBay:View attachment 70998

For clones they're pretty good. Only issue i have is, to get the correct eye relief on the G43 I've had to remove the rear iron sight. the G33 may have been a better option for me. Package had the 558, G43, batteries, Scopecoat, EoTech stickers and a really solid storage box.

View attachment 70999

Hi, Would you have a link for these please, my googling skills are falling short tonight ?‍

 

[C-Diddy]

I've one similar - its a 44mm - on my Air Arms S410. Lovely scope and i'm sure you'll like it too ? 

Hi, Would you have a link for these please, my googling skills are falling short tonight ?‍

Annoyingly it doesn't seem like they're available from the same seller I used. You could always contact them through eBay to see if they still stock them 

https://www.ebay.co.uk/str/realairsoftuk

If not, this looks similar, if not identical, standfast the extras I got like the ScopeCoat and batteries etc:

https://www.ebay.co.uk/itm/Holographic-Red-Dot-style-XPS3-558-Airsoft-Scope-Sight-G43-Magnifier-/294056673191?_trksid=p2349624.m46890.l49292

 

[Skara]

Bit the bullet and ordered a Combat Union AK hop chamber along with a sling for my 74u

 

[leadly]

View attachment 71179

This bad boy turned up yesterday! IBe fires it and oh my, a big daft grin quickly appeared on my face! Not tested it at range as their is too much stuff in the garden to break if the spread is rather wide! It will definitely upset someone!!

 

[PopRocket123]

View attachment 71179

This bad boy turned up yesterday! IBe fires it and oh my, a big daft grin quickly appeared on my face! Not tested it at range as their is too much stuff in the garden to break if the spread is rather wide! It will definitely upset someone!!

I want to print a taser that takes one of these. I think that'd be great fun to have with a police loadout. 

 

[Asomodai]

Ordered some original Russian uniforms from DGBakery. (At great expense)

2007 FSB Government Contract Sniper Suit 56/58-6

SOBR Black Moss Suit with Patches.