The 'What have you just bought' Thread

[Shamal]

Thanks buddy

 I will check it out. Cheers ?

Regards 

 

[Asomodai]

ZCI 450mm Inner barrel and Guarder Clear for the E&L AK. Want to boost that FPS up from 327 to 340

 

[TheFull9]

Soon Crye won't need to fulfill military contracts to keep the lights on.  They'll just wait for Chris' next order.

? they actually don't make much off me (comparatively speaking), most of it comes from ebay.  Might get some of the hot weathers but that's it for now in terms of stuff that's commercially available, don't rate the PCs for airsoft personally.

 

[alxndrhll]

Joined the SRS club, immediately pulled it apart to paint it (along with a suppressor cover). Scope mount also showed up today, looking forward to the scope arriving along with some parts for the SRS.

View attachment 61879

 

[PopRocket123]

The box of bits arrived today and in about an hour I had it mostly together. I didn't bother doing it 100% as it's coming apart soon to get completely rebuilt. It's scruffy and there are some fitment issues in a couple of places and a couple of bits missing but nothing that can't be fixed. Overall I'm really happy with it, it was cheap, it's lightweight and when it's done it'll be a good reliable backup or loner gun

View attachment 61880

 

[Stevobeavo]

I just took the plunge and ordered my first Airsoft gun. 

Went with the specna arms SA-E07. From what I could find out about it it should serve me well for a while. 

 

[paradoxum]

SHS (RA) Tappet Plate (V2), CYMA 15 Tooth Reinforced Piston w/ Piston Head, SHS (RA) 12:1 Gears, SHS Shim Set and 8mm SHS Bushings for my SCARH

 

[DarkAssassin]

Just brought some new parts for the Daytona G&P M4

•High Rof spring

•New flat tip (rubber) hop up set screw

•New Reap nub hop up bucking

•R hopped the barrel while I had it all apart

Video for sexy noise and recoil, love a Daytona gun! Has been going strong now for 3 and a half years!

View attachment 61944


Also ordered a new barrel for my Scar H Daytona gun,  will R hop and fit that aswell as a high ROF spring too.

 

[Cromulon1994]

I've been trying to prise this off a mate for a while, a KTW flintlock. Finally succeeded.

It's a Springer, about 230 fps but very accurate and consistent, which actually makes it a skirmishable gun.

View attachment 61979

 

[paradoxum]

About to buy a new grip for my SCARH. It seems Magpul grips should work with a bit of sanding on the grip / some shimming, I was going to get a PTS EPG M4 Grip: 

https://www.fire-support.co.uk/product/pts-epg-m4-grip-aeg---black

But I stumbled across this one:

https://www.justcauseairsoft.co.uk/index.php?route=product/product&product_id=717

I think the two-toned one will look great on a Tan SCARH. Thoughts? 

 

[MILITATED]

I think the two-toned one will look great on a Tan SCARH. Thoughts? 

Go a step further and two tone the whole thing ?

View attachment 62006

 

[paradoxum]

Go a step further and two tone the whole thing ?

View attachment 62006

I've already got that UGL in Tan, and the ACR Renegade stock in tan on order  

 

[GothicGhost]

Wanted something lighter then my plate carrier

Viper chest rig to go with my viper backpack.

View attachment 62065

View attachment 62066

 

[L3wisD]

The original thread is knackered, so we'll start a new one. 

I've bought Shed Loads recently:

• Viper VX Buckle Up Plate Carrier (Gen2) - Black
  
• Viper VX Utility Chest Rig (Black)
  
• Viper VX (See a theme here?) Pistol mag insert
  
• Viper VX Pistol holster insert
  
• Viper Scrote Dangler (Black)
  
• Surefire XC-1 Torch Clone
  
• Nuprol Black cap
  
• UKARA Police Patches
  
• Delta Mike Facepro Snood (Grey)
  

All of which you can see here:

 

[MikeMarden]

Equally seem to be buying up somewhat over the past few months. Gone back down the Sniping route, although this time no dressing like a tree & camping!

SRS Silverback with full EdGi kit & Longbow internals

TM MP5K HC as the sidearm - Absolutely stock but what a decent little gun straight out of the box!

View attachment 62282

View attachment 62283

View attachment 62284

 

[AlphaBear]

Went for a skirmish on Saturday just gone and came back with another recoil. TM Storm, a modern twist to the AK. And I can even add a CTR stock. Whoopie. 
 

Thanks to my mate who let me have it. Now I need some more mags!!!

View attachment 62285

 

[Big Daddy Vladdy]

The original thread is knackered, so we'll start a new one. 

I've bought Shed Loads recently:

• Viper VX Buckle Up Plate Carrier (Gen2) - Black
  
• Viper VX Utility Chest Rig (Black)
  
• Viper VX (See a theme here?) Pistol mag insert
  
• Viper VX Pistol holster insert
  
• Viper Scrote Dangler (Black)
  
• Surefire XC-1 Torch Clone
  
• Nuprol Black cap
  
• UKARA Police Patches
  
• Delta Mike Facepro Snood (Grey)
  

All of which you can see here:

I’ve been using the pistol holster in my VX chest rig, found it a little bulky. How does it work for you?

 

[PopRocket123]

The original thread is knackered, so we'll start a new one. 

I've bought Shed Loads recently:

• Viper VX Buckle Up Plate Carrier (Gen2) - Black
  
• Viper VX Utility Chest Rig (Black)
  
• Viper VX (See a theme here?) Pistol mag insert
  
• Viper VX Pistol holster insert
  
• Viper Scrote Dangler (Black)
  
• Surefire XC-1 Torch Clone
  
• Nuprol Black cap
  
• UKARA Police Patches
  
• Delta Mike Facepro Snood (Grey)
  

All of which you can see here:

How is the viper chest rig? I'm after a cheaper alternative to buying a new WAS panel for each of my guns. 

In anticipation of eventually getting back on the field and hopefully getting my M249 up and running, I have become very aware of my skinny arms. So I've got myself a set of weights in the hopes that it'll last longer than half the first game ?

 

[leadly]

I can't stop buying "just a few bits"!

Sniper string

Recon Raffia

4 cheap o Walkie talkies so I can tell my mates I've fallen down a rabbit hole while out on a sniper flanking mission!

3D printed Osprey MK23 supressor from PrintedAirsoft

A pack of £2.99 fake leaves to play "craft" with

View attachment 62330

 

[L3wisD]

The old thread is now fixed, so I've merged the temporary new thread with this one!

As you were!

I’ve been using the pistol holster in my VX chest rig, found it a little bulky. How does it work for you?

I find it ok to be fair.
The trick I found is to holster your pistol into the insert and then insert the VX Holster insert into your chest rig with the pistol in. The Utility rig will then form around the pistol, so it fits well while still allowing the pistol to have room.

How is the viper chest rig? I'm after a cheaper alternative to buying a new WAS panel for each of my guns. 

It's really really good. Especially considering how little they cost.. about £24 in some shops!

It's especially convenient being able to have each one set up for a different play style too. Saves having to buy a new plate carrier and pouches for each eventuality.

I've no complaints about the quality either, the stitching is nice and tidy and they feel very robust.

Very much recommend the newer Viper gear (just maybe avoid the older stuff)