The 'What have you just bought' Thread

[Nick G]

250mm for the inner barrel right up to the end of the outer.

GM 3.5 nozzle, but take the seal off the back of the stock nozzle (GM rear seal isn't compatible with DE BCG) for being able to fit an NPAS - NPAS doesn't fit in stock DE nozzle.

Jaeger or FEDA for NPAS - former is easier to get hold of in the UK, latter has some QC issues as of late.

Bavtac/Jaeger nubs aren't compatible with DE hop arm, unless you want to overhop .48's with no hop applied ofc.

MR hop rubbers contact patch get eaten by the nozzle on both stock and GM, so something flamingo or similar (which is a bugger as flamingo are flimsy).

Did it have a black or silver BCG? If its black (V2), the mags are good, if its silver (V1) you'll want to get something else.

Thanks for that. I'll digest it and order some goodies. Bolt was from memory black so V2 

I have a couple of Lancer mags on the way to top me up to start with.

Shame that M/L rubbers don't work as they are my usual goto for my GBBRs. Flamingo it is !

 

[Cannonfodder]

Balystik tank, regulator, line and valve to fit my GE shotgun. Now I just have to find somewhere local who can fill it, incase sites are unable to

 

[ButcherBill]

Balystik tank, regulator, line and valve to fit my GE shotgun. Now I just have to find somewhere local who can fill it, incase sites are unable to

There's someone at my usual site that runs a generator/compressor for his HPA, noisy as hell but might be worth a consideration?

 

[Cannonfodder]

There's someone at my usual site that runs a generator/compressor for his HPA, noisy as hell but might be worth a consideration?

Thanks but Hertfordshire to Scotland is a bit too much of a commute?

I know most sites can fill them but I know a few can't so I just want other options

 

[ButcherBill]

Thanks but Hertfordshire to Scotland is a bit too much of a commute

We have cleaner air up here tho... well maybe not considering the proximity to Grangemouth petrochemical site.

*cough*

 

[Skara]

1x Begadi Neptun M4 hop unit,

1x Begadi MHP5 in 60°

1x Begadi SHP5 in 60°

1x Begadi M150 spring

ordered on Tuesday, delivered 10 minutes ago.

Hopefully these will sort my brushless DSG's power, feeding and range/consistency.

This way I can also start fucking off Maxx units from my guns

Also, from skirmshop:

1x Stalker Morpheus Carbon 155x6.05 (this one should've been 3mm longer to match my current chopped barrel, but I reckon it's going to be fine)

1x Stalker Morpheus Carbon 185x6.05

1x Stalker 60° R-Hop patch

 

[DerDer]

1x Begadi Neptun M4 hop unit,

1x Begadi MHP5 in 60°

1x Begadi SHP5 in 60°

1x Begadi M150 spring

ordered on Tuesday, delivered 10 minutes ago.

Hopefully these will sort my brushless DSG's power, feeding and range/consistency.

This way I can also start fucking off Maxx units from my guns

Also, from skirmshop:

1x Stalker Morpheus Carbon 155x6.05 (this one should've been 3mm longer to match my current chopped barrel, but I reckon it's going to be fine)

1x Stalker Morpheus Carbon 185x6.05

1x Stalker 60° R-Hop patch

Will be interested to see how you find these compared to the Maple leaf offerings. 

 

[Anonymoose]

Alright - let's see what all the fuss is about...

View attachment 139856

Where did you buy it?

 

[Anonymoose]

A very nice Wadsn red/green laser aimer:

View attachment 140027

View attachment 140028

This weapon light is quite a bit bigger than expected. Not as bright as you'd think it'd be for the size but still nice.

View attachment 140026

 

[Johndaniel4863]

My latest purchase and LCT LK53 to use with the 33 and their big brother the G3View attachment 140030....but the batteries I have are too big for the handguard ?

View attachment 140030

 

[Anonymoose]

My latest purchase and LCT LK53 to use with the 33 and their big brother the G3....but the batteries I have are too big for the handguard ?

View attachment 140030

How do you like it so far? I'm about to buy an LCT LC-3K EBB. From what i've heard the LCTs are quite well-built and solid.

 

[Speedbird_666]

Where did you buy it?

From @ak2m4

 

[GiantKiwi]

Thanks for that. I'll digest it and order some goodies. Bolt was from memory black so V2 

I have a couple of Lancer mags on the way to top me up to start with.

Shame that M/L rubbers don't work as they are my usual goto for my GBBRs. Flamingo it is !

Lancer mags are CGS system (only marginally MWS compatible), so you may have issues with the gas routers being too proud. Cheap enough fix if it happens, as just replace with the guarder ones.

 

[ButcherBill]

This weapon light is quite a bit bigger than expected. Not as bright as you'd think it'd be for the size but still nice.

You over compensating?

 

[Anonymoose]

You over compensating?

Maybe a little. But i've seen someone with a full-size Streamlight on an MP5..

?

 

[ButcherBill]

Maybe a little. But i've seen someone with a full-size Streamlight on an MP5..

?

Streamlight SL-20XP if you don't mind. 

 

[ak2m4]

From @ak2m4

31K's Long and Short should arrive next week

 

[Dusix]

Today arrived to me, it's second hand. As I know it used to belong to AFUK member. Kit includes RIF and 4 mags.

View attachment 140103

 

[Anonymoose]

View attachment 140172

I suppose i should probably buy a Glock 45 now.

 

[Darkmikey22]

A 3d print of the shield sms susat mount. As used by UKSF. 

Painted and weathered to look metal. 

And a real shield red dot. 

View attachment 140192