THE TM MWS thread

[Cyberlawyer]

Ouch!!

That would bloody hurt, especially on a tiled floor!!!

 

[Davegolf]

Not with a PC on

 

[Cyberlawyer]

Oops, you just reminded me I have another 8 mags in a PC that I used at the last skirmish that I had forgotten about. ?‍?‍?‍

 

[AlphaBear]

Oops, you just reminded me I have another 8 mags in a PC that I used at the last skirmish that I had forgotten about. ?‍?‍?‍

I thought I had too many at 8, two of which are still in their wrapping unused. ?

 

[Cyberlawyer]

I normally carry anywhere between 5 (3 in the plate, 1 on a belt and 1 in the gun) all the way up to 17 (8 on PC, 2 on belt, one in gun and 6 in an assault pack) depending on what I am doing.

I do lean towards the lower end of the scale most of the time with 7 being the norm.

I don't think I will ever carry all of the magazines I own.

 

[rj1986]

 

[Shamal]

That's crazy!! That antenna is gonna go right up his gonker if he falls! ?

Regards 

 

[rj1986]

Part of the gang. Now to get nubs and print a speed loader, and cut the gas tubes 

View attachment 77518

 

[Davegolf]

You going to print one that covers the whole of the top of the mag?

 

[rj1986]

Probably - thingyverse has a few options 

 

[Joe142]

Hi all, anyone run the G&P bolt carrier group? I’ve used it and love it but it’s only really good for my dmr setup I’m building as when installed I get 1.55J output, when the stock bolt is in it drops significantly to around 1/1.1J, not sure if anyone else has had that with theirs? 

Also anyone got any experience with the RA tech NPAS? 

 

[Hypokondrikern]

Hey I got a reply from Gunsmodify’s customer support (wrote to them earlier this spring..) 

They said that they are planning to release their Pmag in September ( this year ) 
 

 

[Jan Mulder]

hey i'm new here. does anyone have a spare bolt? for sale? Does anyone have any tips on how I can best use a mws for milsim? And do I need to bring any spare parts? I now use aeg but was still looking for more realism. I did the green gas mod. have 6 mags.View attachment 77573

 

[AlphaBear]

Hey I got a reply from Gunsmodify’s customer support (wrote to them earlier this spring..) 

They said that they are planning to release their Pmag in September ( this year ) 
 

PMAGS ??  The only question is will they be as good as the Marui mags? 

 

[Joe142]

What’s the difference in the PMAGS to the stock Marui mags? I assume they’re lighter?

 

[SSPKali]

Hi all, anyone run the G&P bolt carrier group? I’ve used it and love it but it’s only really good for my dmr setup I’m building as when installed I get 1.55J output, when the stock bolt is in it drops significantly to around 1/1.1J, not sure if anyone else has had that with theirs? 

Also anyone got any experience with the RA tech NPAS? 

Others have found that it gives higher power.

I have used a RA Tech NPAS in a TM nozzle / bolt and found it pretty good at dropping the FPS. You need the black one, as the silver (WE) one is too fat to fit.

I would check what is in the G&P nozzle to start with as they might have used the 3 position valve stopper (or get one for £9 from Firesupport) as this can be used to alter the FPS too.

hey i'm new here. does anyone have a spare bolt? for sale? Does anyone have any tips on how I can best use a mws for milsim? And do I need to bring any spare parts? I now use aeg but was still looking for more realism. I did the green gas mod. have 6 mags.View attachment 77573

A spare nozzle and nozzle spring would be the minimum, I usually take a spare complete nozzle (easier to swap out) or complete bolt (even faster to change)

Other than that taking the AEG as insurance might be a good move. I have found the MWS to be very reliable but if you have travelled to the other end of the country and still have 23hrs of game play left if would suck to not have a rifle!

 

[Jan Mulder]

Others have found that it gives higher power.

I have used a RA Tech NPAS in a TM nozzle / bolt and found it pretty good at dropping the FPS. You need the black one, as the silver (WE) one is too fat to fit.

I would check what is in the G&P nozzle to start with as they might have used the 3 position valve stopper (or get one for £9 from Firesupport) as this can be used to alter the FPS too.

A spare nozzle and nozzle spring would be the minimum, I usually take a spare complete nozzle (easier to swap out) or complete bolt (even faster to change)

Other than that taking the AEG as insurance might be a good move. I have found the MWS to be very reliable but if you have travelled to the other end of the country and still have 23hrs of game play left if would suck to not have a rifle!

Is the angry gun bolt carrier group any good? I’ve searched everywere forma stock tm bolt.

 

[Joe142]

Is the angry gun bolt carrier group any good? I’ve searched everywere forma stock tm bolt.

I’ve not heard very brilliant things about angry gun but haven’t tried any of their parts personally, I’ve just been told by a few to stay clear, personally I love the g&p bolt carrier, not had any problems with it yet but as I say it does increase FPS quite considerably in my case so may need an npas to make it site legal 

Others have found that it gives higher power.

I have used a RA Tech NPAS in a TM nozzle / bolt and found it pretty good at dropping the FPS. You need the black one, as the silver (WE) one is too fat to fit.

I would check what is in the G&P nozzle to start with as they might have used the 3 position valve stopper (or get one for £9 from Firesupport) as this can be used to alter the FPS too.

Awesome thank you buddy I’ll take apart the g&p and take a closer look at the parts inside, I don’t believe it has a valve stopper but I’ll take a look, can the valve stopper be adjusted to do the same job as an Npas? 

 

[TadsJ2]

Probably not on the current topic, but how long does the gas route seal hold? mine is starting to wear down and i can see some damage on it...  is it normal?

View attachment 77592

is there anything to be done apart from changing it? is my G&P nozzle causing this?

Also should i order RIW T8 mag gaskets (cant find TM's anywhere in stock) for replacement ?

 

[SSPKali]

I’ve not heard very brilliant things about angry gun but haven’t tried any of their parts personally, I’ve just been told by a few to stay clear, personally I love the g&p bolt carrier, not had any problems with it yet but as I say it does increase FPS quite considerably in my case so may need an npas to make it site legal 

Awesome thank you buddy I’ll take apart the g&p and take a closer look at the parts inside, I don’t believe it has a valve stopper but I’ll take a look, can the valve stopper be adjusted to do the same job as an Npas? 

The G&P adjustable stop has 3 different holes for the thin cross screw so it adjusts how far forward the valve sits and thus the power.
 

I was getting 180fps / 260fps / 290fps on green gas and 0.30g BBs at 18degC on the low/mid/high settings IIRC. Stock TM bolt/nozzle/etc